Additional Information; Managing Power In A Lan; Managing Power With Ip Routing - Cisco IE-3000-8TC Software Configuration Manual

Additional Information

Additional Information
•
•

Managing Power in a LAN

Multiple switches connected in the same LAN and in the same EnergyWise domain.
Figure 5-4
Port 24
The domain configuration includes
•
•
On Switch 1, configure the domain:
Switch(config): energywise domain cisco secret 0 cisco protocol udp port 43440 interface
gigabitethernet1/0/23
On Switch 1, verify that the EnergyWise protocols discovered the neighbors:
Switch# show energywise neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
Id
--
4

Managing Power with IP Routing

Switch 1 and Switch 2 are in a disjointed domain. Neighbors might not be discovered automatically.
Cisco IE 3000 Switch Software Configuration Guide
5-18
Managing Power in a LAN, page 5-18
Managing Power with IP Routing, page 5-18
EnergyWise with LANs
Switch 1
UDP default port (43440)
Gigabit Ethernet port 1/1/23 on Switch 2 with a connected Catalyst PoE switch.
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
Neighbor Name
-------------
Switch-2
Switch 2
Port 1 Port 24
Port 23
Catalyst PoE switch
Ip:Port
-------
192.168.20.2:43440
Chapter 5 Configuring Cisco EnergyWise
Prot Capability
---- ----------
udp S I
OL-13018-03