Discovery Through Different Management Vlans - Cisco IE-3000-8TC Software Configuration Manual

Chapter 7 Clustering Switches
Figure 7-3
Command device

Discovery Through Different Management VLANs

Catalyst 2970, Catalyst 3550, Catalyst 3560, or Catalyst 3750 cluster command switches can discover
and manage cluster member switches in different VLANs and different management VLANs. As cluster
member switches, they must be connected through at least one VLAN in common with the cluster
command switch. They do not need to be connected to the cluster command switch through their
management VLAN. The default management VLAN is VLAN 1.
If the switch cluster has a Catalyst 3750 or 2975 switch or has a switch stack, that switch or switch stack
Note
must be the cluster command switch.
The cluster command switch and standby command switch in
Catalyst 2960, Catalyst 2970, Catalyst 2975, Catalyst 3550, Catalyst 3560, or Catalyst 3750 cluster
command switches) have ports assigned to VLANs 9, 16, and 62. The management VLAN on the cluster
command switch is VLAN 9. Each cluster command switch discovers the switches in the different
management VLANs except these:
•
•
OL-13018-03
Discovery Through Different VLANs
VLAN 62 VLAN trunk 9,16
VLAN 62 VLAN trunk 9,16
VLAN 16 VLAN trunk 4,16
Switches 7 and 10 (switches in management VLAN 4) because they are not connected through a
common VLAN (meaning VLANs 62 and 9) with the cluster command switch
Switch 9 because automatic discovery does not extend beyond a noncandidate device, which is
switch 7
VLAN 50
Cisco IE 3000 Switch Software Configuration Guide
Planning a Switch Cluster
Figure 7-4 (assuming they are
7-7