Using Cli Commands; Verifying The Power Usage - Cisco IE-3000-8TC Software Configuration Manual

Chapter 5 Configuring Cisco EnergyWise

Using CLI Commands

Table 5-2 EnergyWise Commands
Command
clear energywise neighbors privileged EXEC
no energywise interface configuration
no energywise domain global configuration
Table 5-3
Command
show energywise
show energywise children
show energywise domain
show energywise events
show energywise neighbors
show energywise recurrences
show energywise statistics
show energywise usage
show energywise version
show power inline
show cdp neighbors
For more information about the commands, see the command reference for this release.

Verifying the Power Usage

•
OL-13018-03
Purpose
Delete the EnergyWise neighbor tables on the entity. It immediately
discovers the neighbors and recreates the table.
Disable EnergyWise on the PoE port.
Disable EnergyWise on the entity.
show Privileged EXEC Commands
This example shows that the Cisco 7960 IP Phone uses 6.3 watts and that the Cisco 7970G IP Phone
uses 10.3 watts.
Switch# show energywise usage children
Interface Name
--------- ----
Switch
Gi1/1/1 Gi1.1.1
Gi1/1/2 Gi1.1.2
Purpose
Display the settings and status for the entity.
Display the status of the entity and the PoE ports in the
domain.
Display the domain to which the entity belongs.
Display the last ten events (messages) sent to other entities
in the domain.
Display the neighbor tables for the domains to which the
entity belongs.
Display the EnergyWise settings and status for recurrence.
Display the counters for events and errors.
Display the current power usage on the entity.
Display the current EnergyWise version.
Display the PoE status.
Display the neighbors discovered by CDP.
Usage Caliber
----- -------
144.0 (W) max
6.3 (W) trusted
10.3 (W) trusted
Cisco IE 3000 Switch Software Configuration Guide
Troubleshooting EnergyWise
5-17