Advertisement
Scanned page is
shown here
When all pages are scanned,
click to save the document
3–8
Contents
4. Click the Scan button on the Scanner dialog box.
With most flatbed scanners, Pagis Pro can perform a two-pass
scan. This optimizes binary (black and white) scanning for the
text layer and color scanning for the graphics layer. If you select
Letter as the page type, or Photograph, Pagis Pro will only
perform a one-pass scan. This is because Pagis Pro does not
need to segment the resulting file into multiple layers.
As the page is being scanned, a Scanner Progress dialog box
tracks scanning status. After the page is scanned, additional
buttons appear on the dialog box, allowing you to scan more pages
or end the job and save the scanned image (Figure 3–5).
Figure 3–5. Scanner Progress dialog box
5. To continue scanning go to Step 6. To end scanning and
save your document, go to Step 8.
6. Insert the next page into the scanner, and click the More
Pages button.
Pagis Pro User's Guide
Index
Click to scan the next
page of the document
Advertisement
