Advertisement
Specify resolution
Darken or lighten
the image
Click OK when done
Contents
To specify a custom size, type a new width and length, and
click OK to close the User-Defined Size dialog box.
In the Properties dialog box, click the Graphics tab to bring
this set of properties to the front (Figure 5–3).
Figure 5–3. Graphics properties for Pagis Print Driver
Specify graphic resolution (100 or 300 dots per inch).
Specify the type of dithering pattern if any. For color
printing, dithering blends pure colors into patterns to
simulate a wider range of colors. For example, orange is
produced by blending red and yellow. For black and white
printing, dithering produces gray shading in graphics. Click
None if you do not want any dithering. Click Fine if your
resolution is 200 dpi or less. Click Coarse if your resolution is
300 dpi or higher. Click Line Art if your graphics are line
drawings. Click Error Diffusion for printing photographs that
do not have sharp, well-defined edges.
Examples and Advanced Features
Index
Specify dither
pattern
Specify color
control options
5–15
Advertisement
