Xerox DocuPrint 115 System Manual
  1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Software
  5. DocuPrint 115
  6. System manual
Xerox DocuPrint 115 System Manual

Xerox DocuPrint 115 System Manual

Common controller
Hide thumbs Also See for DocuPrint 115:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Operator's Manual
Xerox Document Services Platform Series
Common Controller
System Guide
701P38837
DocuSP 3.6
August, 2002

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DocuPrint 115 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Xerox DocuPrint 115

Summary of Contents for Xerox DocuPrint 115

  • Page 1 Xerox Document Services Platform Series Common Controller System Guide 701P38837 DocuSP 3.6 August, 2002...
  • Page 2 CORPORATION. All non-Xerox brands and product names are trademarks of their respective companies. Other company trademarks are also acknowledged. While the information in this Guide is correct at the time of publication, Xerox reserved the right at any time to change the information without notice. Changes are made periodically to this document.

  • Page 3: Table Of Contents

    Internet Services (HTTP) Gateway Configuration Simple Network Management Protocol (SNMP) Configuration 3. Backup and Restore Backup Restore Xerox Backup & Restore (XBR) Utility for a DP100/115/135/180 EPS System 3-3 4. Security and Network Setup Access and Security Changing the logon level Overview of Security...
  • Page 4 TABLE OF CONTENTS Using scripts to enhance security features Example of /etc/inetd.conf file after security edits Helpful Security tips 5. Printing First In/First Out (FIFO) Printing ASCII and PCL Printing Utility The configure-xdss script Disable LP Anonymous Printing DigiPath and Decomposition Services Remote shell internet service The disable-security script The enable-ftp and disable-ftp scripts...
  • Page 5 Socket Gateway Configuration Utility: setVPSoption TIFF Orientation MICR Enablement Using VIPP Paper Trays Printing hints 6. Finishing Subset Finishing PCL Paper Source Command Mixed Stacking Additional finishing information 7. Fonts How to choose fonts TIFF files 8. Accounting and Billing Accounting Billing SYSTEM GUIDE...
  • Page 6 TABLE OF CONTENTS 9. Troubleshooting Calling for service Declared faults Undeclared faults Printing system logs Rebooting and restarting Loading XDJC/Unix Configuring XDJC/Unix Printer fault Job fault Client problems Windows problems Macintosh problems DigiPath problems GUI problems Print Quality problems Font problems...
  • Page 7 Output files Properly ejecting a diskette from the Diskette drive on a DocuSP workstation 9-17 10. Hints and Tips General Color Systems XJDC Hints and Tips PCI Channel Interface PWB Trace Capture Procedure SYSTEM GUIDE Disabling the Solaris 8 Screen Saver Common Desktop Environment (CDE) Front Panel Removal and Workaround General Comments...
  • Page 8 TABLE OF CONTENTS SYSTEM GUIDE...

  • Page 9: Introduction

    Xerox Document Services Platform (DocuSP) for printing systems. NOTE: The Xerox Client Software will be delivered on a floppy for version 3.6. About this guide This guide is intended for Network and System Administrators responsible for setting up and maintaining Xerox printers with DocuSP software.

  • Page 10: Conventions

    Introduction • Accounting and Billing • Troubleshooting • Hints and Tips Conventions This guide includes the following conventions • Angle brackets - Variable information that is displayed on your screen is enclosed within angle brackets; for example, “Unable to copy <filename>.” •...

  • Page 11: Gateway Configuration

    Enter the name of the gateway to be configured: Internet Services Configure the Internet Services Gateway? [Y/N] Enter name: Printer URL: name>.com NOTE: Use the IP address of the controller if there is no domain name. For example, http://52.126.255.255.com 3. A confirmation message of the entered value displays.

  • Page 12: Simple Network Management Protocol (Snmp) Configuration

    SNMP manager, you may want to configure the SNMP gateway using gwConfig and the information that follows. NOTE: SNMP requires a standard FlexLm license. The System Administrator must enable SNMP in License Manager. Xerox recommends the following third–party SNMP software mangers: • IBM Network Printer Manager (NT) •...

  • Page 13: Configuration Variables

    System Guide Configuration variables Of the many parameters that are available for SNMP configuration, only the ones of common interest to Xerox customers are shown in the following table: Parameter Name Description CommandLine Turn on/off the following flags: –l: logging to SNMP_DEBUG_LOG –w: logging to window...

  • Page 14: Printer And Job Messages

    Management Information Bases (MIBs) will only display the printer and job status that they support. SNMP MIB Support DocuSP 3.0 SNMP MIB file uses the Xerox Common Management Interface (XCMI) version 4.0. The following lists the MIB files included for version 4.0: •...
  • Page 15 System Guide • 42jobmtc - XEROX-SIMPLE-JOB-MGMT-TC • 43jobman - XEROX-SIMPLE-JOB-MGMT-MIB • 50commtc - XEROX-COMMS-ENGINE-TC • 51comms - XEROX-COMMS-ENGINE-MIB • 52conftc - XEROX-COMMS-CONFIG-TC • 53config - XEROX-COMMS-CONFIG-MIB • 58svctc - XEROX-SERVICE-MONITORING-TC • 59svcmon - XEROX-SERVICE-MONITORING-MIB • 93pidtc - XEROX-PRODUCT-ID-TC The following is a listing of MIBs that are supported: •...

  • Page 16: Nds Setup

    – The xcmGen Base Group – The xcmGen Trap Client Group – The xcmGen Trap View Group NOTE: The other files in Xerox General MIB are not supported. NDS Setup When using Novell Netware, a preferred server needs to be set for environments where there is more than one server on the network.
  • Page 17 System Guide 7. Select choice 4 to list the current setups to make sure your preferred server was added successfully. 8. Restart the DocuSP software. NOTE: If logging is enabled, you can check /opt/XRXnps/log/ QServer.Debug.Log to make sure that connection is made with the Preferred server.
  • Page 18 Gateway Configuration System Guide Common Controller...

  • Page 19: Backup And Restore

    The following information should also be backed up on a regular basis or when the DocuSP controller has been modified: • Customized scripts installed by the customer • Unique third–party software and related data, or Xerox– developed solutions and related data • DNS, NIS, or NIS+ files •...

  • Page 20: Restore

    The allowable users • Any customer–specific passwords NOTE: In the event of a software upgrade or install by Xerox, Xerox is not responsible for the restoration of the above items to the DocuSP controller. NOTE: It is highly recommended that a complete system image be backed up to tape or a remote location on a regular basis.

  • Page 21: Xerox Backup & Restore (Xbr) Utility For A Dp100/115/135/180 Eps System

    System Guide Xerox Backup and Restore (XBR) Utility for a DP100/115/135/180 EPS System Backing up a System To backup a system, use a DocuPrint EPS controller with a QIC tape drive, at least 3 tapes (maybe up to 6 QIC tapes), and the XBR floppy.

  • Page 22: Restoring A System

    Backup and Restore 15. Type ./xbr 16. but don’t forget the “.” before the “/” 17. Type backup 18. and as the system asks for a new tape, remove the current tape, label it and insert a new tape (each tape takes about 20 to 25 minutes to fill).
  • Page 23 System Guide 8. Once the system reboots, login as root. 9. Create a directory; type mount /dev/diskette /a 11. Type cd 13. Type ./xbr 14. (don’t forget the "." and "/") 15. Type restore 17. Answer 18. for yes to the question that comes up. 19.
  • Page 24 Backup and Restore System Guide Common Controller...

  • Page 25: Security And Network Setup

    NOTE: The user and group identifications, uid and gid, for the Xerox accounts that are listed above cannot be arbitrarily changed in the password and group files to new values because the software is based on the proper access to the Xerox supplied files. Common Controller...

  • Page 26: Changing The Logon Level

    Security and Network Setup To allow non–root user command line clients to submit jobs to the DocuSP controller, the Sun workstation needs two pieces of information in its database: • Users must be listed in the password database. • The client workstations need to be described as trusted hosts for the user account.

  • Page 27: Overview Of Security

    NOTE: The System Administrator should verify access to the Xerox application for all levels before the service installation personnel leave the site. NOTE: To maintain security, it is recommended that any restricted access login be terminated as soon as the session has been completed.

  • Page 28: Xerox Responsibility

    Xerox responsibility Xerox is committed to providing a level of security which will allow the DocuSP controller to be a good network citizen in the response to current security intrusions. Additional security beyond this remains the responsibility of the customer.

  • Page 29: New Security Features

    It is the customer’s responsibility to ensure that the root password is available for them. New security features In this release of DocuSP, the Xerox DocuSP Security Script has been included with the DocuSP software. When invoked, the script implements changes to the Solaris Operating Environment to secure the system against unauthorized access and modification.
  • Page 30 The following list documents the Sun Solaris services that are disabled when the Xerox DocuSP Security Script is run: • ftp (must be enabled for DigiPath and Continuous Feed systems) •...

  • Page 31: Using Scripts To Enhance Security Features

    NOTE: The new scripts are explained in greater detail later in this document. Using scripts to enhance security features The Xerox DocuSP Security Script (XDSS) is comprised of several scripts to that are located in the /opt/XRXnps/bin directory. These scripts enhance security features and must be run when you are logged in as root.

  • Page 32: The Configure-Xdss Script

    DocuSP Security feature. Disable LP Anonymous Printing You can select if you wish to disable anonymous printing on all existing LP printer queues that are associated with the DocuSP virtual printers. Select for yes to disable this printing option.

  • Page 33: Remote Shell Internet Service

    System Guide Remote shell internet service If you are using the print command line client, you will need to use the remote shell internet service to transfer files to the DocuSP server. However, if you are not using the print command line client, it is strongly recommended that the remote shell internet service is disabled.

  • Page 34: Secure Solaris File Permissions

    Security and Network Setup • Disallowing all users for at, cron, and batch commands • Disabling unnecessary solaris services • Disabling bwnfs daemon • Disabling unnecessary internet services daemon • Securing name service cache daemon • Multicast routing • Hide OS and host information •...

  • Page 35: Disable Unnecessary Internet Services Daemons

    System Guide • S4011c2: Class II logical link control driver • S47asppp: Asynchronous PPP link manager. This service is re-enabled via enable-remote-diagnostics command. • S70uucp: UUCP server • S711dap.client: LDAP daemon to cache server and client information for NIS lookups. •...

  • Page 36: Remote Diagnostics

    Security and Network Setup • name: Obsolete IEN-116 name service • finger: Remote user information server • uucp: Used by UUCP over IP". • talk: server talk program • comsat: Biff server - mail notification daemon • exec: Remote execution server. Used by rexec(1) command •...

  • Page 37: Multicast Routing

    System Guide Multicast routing Multicast is used to send data to many systems at the same time while using one address. It is recommended to disable this feature when security is enabled. Hide OS and host information When security is enabled, the ftp and telnet banners are set to null.

  • Page 38: Disabling Remote Login To Cde

    Security and Network Setup Disabling remote login to CDE Ensure that all remote logins are prohibited to CDE on the DocuSP by installing the appropriate /etc/dt/config/Xaccess file. Disabling DocuSP as a router To prevent the DocuSP server from being used a router, create an empty file, /etc/notrouter.
  • Page 39 System Guide usr/sbin/in.ftpdin.ftpd telnet usr/sbin/in.telnetdin.telnetd # Tnamed serves the obsolete IEN-116 name server protocol. ###name usr/sbin/in.tnamedin.tnamed # Shell, login, exec, comsat and talk are BSD protocols. ###shell stream usr/sbin/in.rshdin.rshd login usr/sbin/in.rlogindin.rlogind ###exec usr/sbin/in.rexecdin.rexecd ###comsatdgram usr/sbin/in.comsatin.comsat ###talk usr/sbin/in.talkdin.talkd # Must run as root (to read /etc/shadow); "-n" turns off logging in utmp/wtmp.
  • Page 40 Security and Network Setup #systat usr/bin/ps #netstat stream usr/bin/netstat netstat -f inet # Time service is used for clock synchronization. ###time internal ###time internal # Echo, discard, daytime, and chargen are used primarily for testing. ###echo internal ###echo internal ###discardstream internal ###discarddgram internal...
  • Page 41 System Guide valid nettype then it is # treated as a netid. The "*" is a short-hand way of saying all the # transports supported by this system, ie. it equates to the "visible" # nettype. The syntax for <proto> is: *|<nettype|netid>|<nettype|netid>{[,<nettype|ne tid>]}# For example: # dummy/1tli...
  • Page 42 #100235/1 tli rpc/tcp wait root /usr/lib/fs/ cachefs/cachefsd cachefsd # Kerbd Daemon #kerbd/4 root # Print Protocol Adaptor - BSD listener #printer root dtspc stream tcp nowait root /usr/dt/bin/dtspcd /usr/dt/bin/dtspcd xaudio bin/Xaserver Xaserver -noauth -inetd 100068/2-5 dgram rpc/udp wait root /usr/dt/bin/ rpc.cmsd rpc.cmsd...

  • Page 43: Helpful Security Tips

    System Guide ###100083/1 tli rpc/tcp wait root /usr/dt/bin/ rpc.ttdbserverd /usr/dt/bin/rpc.ttdbserverd 536870916/1 SUNWvts/bin/vtsk /opt/SUNWvts/bin/vtsk Helpful Security tips Most of the files and processes modified in this document have a corresponding man page that describes, in considerable detail, their functionality. It is good practice to read the man pages on each item to get an understanding of the process being modified to ensure ahead of time if your workflow may be effected.
  • Page 44 Security and Network Setup In order to determine what security options have been implemented in the past, whenever configure-xdss is run, it logs all of the actions into the /opt/XRXnps/log/xdss_log.txt. View this file to view options that have been implemented. 4-20 System Guide Common Controller...

  • Page 45: Printing

    The following information will help you understand how to enable and print using FIFO printing. The various printing utilities that are available are also outlined in this section as well as using TIFF orientation, MICR, and VIPP. First In/First Out (FIFO) Printing When jobs are printed in the same order in which they are received, this is FIFO printing.

  • Page 46: Enable/Disable Fifo Job Scheduling

    • If the queue that is set to use FIFO is not currently releasing jobs to the printer, then the jobs may not appear in the correct FIFO order. Select [Job Manager] and then select the Options menu. Select [Redisplay] to view the jobs in correct FIFO order.
  • Page 47 System Guide • ‘Enabling FIFO Job Scheduling’ ’You will need to Restart the DocuSP Software for changes to take effect’ • ‘No Change Made’ • ‘Currently FIFO Job Scheduling is on’ ’Do you wish to disable FIFO Job Scheduling? (y/n)’ •...

  • Page 48: Ascii And Pcl Printing Utility

    Printing With FIFO Job Scheduling disabled, the Controller will schedule the jobs for print as soon as they complete their “Receiving Data” status in Job Manager. Therefore, Job ID 2 will be scheduled for print before Job ID 1 if Job ID 2 goes “Pending” before Job ID 1. The following table illustrates an example of FIFO Job Scheduling.

  • Page 49: Setpclontrol Utility

    System Guide As an alternative, ASCII files can be identified as PCL and sent through the PCL decomposer. The PCL decomposer does provide some additional capabilities that can be used to print ASCII files as desired. To force ASCII files to use the PCL decomposer, change the file format in Job Manager.

  • Page 50: Set Lp/Lprcopycount Utility

    Printing • This utility changes the PCL decomposer default line termination. This utility should not be used in a mixed PCL and ASCII environment. This is because PCL data streams can include another line termination escape sequence. Such a job will change the line termination setting again (possibly without the user's knowledge).

  • Page 51: Socket Gateway Configuration Utility: Setvpsoption

    System Guide Socket Gateway Configuration Utility: setVPSoption This utility allows you to configure the two ports of the Socket Gateway to either remove the echo commands (VPS) or leave the data unaltered (NONVPS). If you are a DT61xx or DT65/75/90 non-LCDS customer, configure both ports as NONVPS.

  • Page 52: Tiff Orientation

    This is commonly used in banking for account numbers, routing codes and amounts on checks. On Xerox MICR printers, the complete page is printed with magnetic toner and the characteristics of the MICR fonts allow only the MICR characters to be comprehended by MICR readers.

  • Page 53: Using Vipp

    System Guide Using VIPP To specify a job as a VIPP job, a start string is required. The required start string can be automatically added using DocuSP functionality. This can be completed using the Command Line Client, Queue Manager, and Job Properties. To implement the VIPP Start feature, perform the following: 1.
  • Page 54 Printing System Guide 5-10 Common Controller...

  • Page 55: Finishing

    This product allows more than one type of finishing within a single PostScript job. The supported finishing options and the output locations that can be used vary depending upon the printer type. The finishing options and delivery locations are the following: DocuTech 61xx: •...

  • Page 56: Creating Jobs To Use Subset Finishing

    • Variable Data Intelligent PostScript PrintWare (VIPP) version 2.0 or later. NOTE: The Xerox Production Print Services (XPPS) client software does not support subset finishing at this time. Subset finishing can also be performed at the DigiPath workstation through the Document Scan and Make Ready application.

  • Page 57: Pcl Offset/Separator/Subset Finishing Command

    • The offset switch in Printer Manager in the DocuSP software must be set to ON. If the offset switch is set to OFF and a job with the PCL separator command is received, the sets will not offset when the job is printed.

  • Page 58: Pcl Paper Source Command

    Mixed stacking is enabled upon installation but can be disabled if you choose to do so. If you wish to have it enabled at a later date, a Xerox Service Representative must assist you. System Guide Common Controller...

  • Page 59: Additional Finishing Information

    System Guide Additional finishing information The DocuSP is unable to dual staple 3-hole punched stock. If dual staple is selected when using pre-drilled paper, improper registration will occur. Select to single staple the job, or print on non-drilled stock and manually punch the holes after finishing of dual staple is complete.
  • Page 60 Finishing System Guide Common Controller...

  • Page 61: Fonts

    The following information explains how to use and choose fonts for a job. It also covers various resident and non-resident fonts and their availability. How to choose fonts Although document source files can specify almost any image on a printed page, images that contain letters, numbers, punctuation, and symbols are common enough to require a special mechanism for dealing with them, similar to movable type.

  • Page 62: Resident Fonts

    The PostScript Type 1 typeface families listed in Table 7–1 are scalable, which means that all point sizes are supported, even intermediate point sizes. These include the typefaces that make up the LaserWriter IINTX basic font set, plus additional Type 1 fonts supplied by Xerox. Font Family ACaslon AGaramond...
  • Page 63 System Guide Font Family Chicago Clarendon CooperBlack Coronet Courier Eurostile Formata Garamond Geneva GillSans Goudy Helvetica HoeflerText Joanna Kaufmann Korinna LetterGothic Liithos LubalinGraph Marigold MonaLisa–Recut Monaco New Century Schoolbook NewYork Optima Oxford Palatino Parisian ParkAvenue Common Controller Table 7-1. Fonts Stresses and weights Bold, Light Regular, Italic, ThirtyThreeBC, ThirtyTwoBC...
  • Page 64 LaserJet IV bitmap typefaces • Typefaces that match the TrueType fonts as shown in Table 7–4. NOTE: These are the same internal typefaces that are provided with the HP LaserJet 4 printer. Font Family Albertus Arial Antique Olive CG Times...

  • Page 65: Non Resident Fonts

    DocuSP controller, your application may automatically download the font when the job is sent to the printer. Fonts downloaded in this manner are considered "temporary" and are deleted from the DocuSP controller as soon as the job is printed.

  • Page 66: Font Substitution

    Fonts NOTE: Marking a font for "permanent" downloading in your application is not supported. • Optional or soft fonts Downloading fonts each time you print will increase the size of the file and result in a longer transmission time. If your print jobs regularly require a font that is not a resident font, you may request to have it installed as an optional font at the DocuSP controller.

  • Page 67: Tiff Overview

    TIFF files that can be submitted to the DocuSP controller and to provide information about the type of TIFF files that will increase printer productivity. Prior to DocuSP 3.1, the controller utilized a conversion tool (TIFF to PostScript) to process and print TIFF files. A native TIFF decomposer has now been implemented to directly process TIFF files for printing.
  • Page 68 Fonts – Default = 0 – This is used to determine CCITT Group 3 one or two dimensional coding. Fill Order – Default = 1 – DocuSP supports values of 1 and 2. Image Width and Image Length – Default = none; values must be supplied. Orientation –...

  • Page 69: Accounting And Billing

    NOTE: When purging, the oldest entry is purged first. Accounting exported values The Accounting feature tracks all jobs that have been processed and printed, enabling your site to charge for use of the Xerox printing system. There are four different versions supported for exporting the customer accounting log.

  • Page 70: Billing

    For CF systems, billing meters are maintained within the print engine. For additional information, contact a Xerox Service Representative. Xerox billable events include the following: • Administration pages, such as the banner page or error page •...

  • Page 71: Billing Meters

    System Guide • Blank sides inserted by the system; for example, the last page of an odd-numbered 2-sided job. • Sheets purged by the system for fault recovery or image quality adjustment • Any partial sets generated when the system fault recovery forces the job to be saved or cancelled during printing.
  • Page 72 Accounting and Billing Table 8-1. Market Region Billing Meters for Region Region 6 Meter 1: Total impressions to an output (FX) destination including Administration Pages. Meter 2: Total impressions for each image of the job up to and including the last sheet of the 10th set.

  • Page 73: Troubleshooting

    Service Support Center phone number. Your site representative can supply you with the telephone number for the Customer Service Support Center in your area. The Xerox Welcome Center number is (800-821-2797) Before calling for service, make note of: • Print/job fault messages, that appear on the system controller.

  • Page 74: Printer Fault

    Troubleshooting Printer fault An indicator will appear on the DocuSP GUI when a printer fault occurs and the Printer Faults window will display. The Printer Faults window will display all existing printer faults. Select a fault to open the Fault Clearance window and proceed to clear the fault by following the instructions in the Printer Faults Clearance window.

  • Page 75: Client Problems

    If the Xerox Document Submission client application does not run properly or the job cannot be submitted to a queue, perform the following: 1. The user must exit the Xerox Document Submission and Windows applications 2. Verify the user is logged on to the appropriate file server.

  • Page 76: Digipath Problems

    Troubleshooting If the Macintosh client cannot view any printer queues from the Chooser, perform the following: 1. Verify that the Apple Talk network, is up and that there is at least one router on the network. 2. If there is no router on the Apple Talk network, jobs cannot be submitted through the Apple Talk gateway.

  • Page 77: Print Quality Problems

    1. Retrieve the error page if one was printed. 2. Submit the job to a draft PostScript printer if one is available to determine if the master is valid. 3. Ensure that the jobs are sent to the correct queue.

  • Page 78: Inoperable System Problems

    Jobs would need to be resent. Job flow problems If a job is submitted to a printer but does not print, this is a job flow problem. System Guide Common Controller...
  • Page 79 If the /var/spool partition is full, determine the size of the /var/ spool/XRXnps/inQ directory. size of the directory, delete the job and restart the Xerox software. If the job is small, store it on a server and resubmit the job from the client.

  • Page 80: Job Integrity Problems

    Troubleshooting 1. Open the printer door. If a message appears in the faults and messages frame, then the communication with the printer is working. 2. Restart the DocuSP software. If the problem still persists, contact the Customer Support Center. Job Integrity problems...

  • Page 81: Tiff Problems

    TIFF image data? • If the file has an orientation problem, has an attempt been made to change the orientation using the Xerox Client Software print command orientation switch? • What compression format was used to compress the file? •...

  • Page 82: Restore Password

    Will all of the pages of the job open with Adobe Acrobat? • What application and/or PDF software created the PDF file? • With the printer’s error pages turned on, does the printer produce a PostScript error page? • Has the file been redistilled again using a newer PostScript? •...

  • Page 83: Restart Docusp Software Without Rebooting

    Trused user and System Administrator passwords.” Select [Reset]. Restart DocuSP software without rebooting If [Exit] is accidentally selected from the Xerox software, perform the following to start the software without rebooting the controller: Open a terminal window and enter the following: .openwin-init...

  • Page 84: Problems When Saving A Job

    Troubleshooting For a TIFF job, type: ps -ae|grep tiff_cdf 6. If problems still persist, contact the Customer Support Center. Problems when saving a job If a job was submitted from a client with a save destination, but is not saved, perform the following: 1.

  • Page 85: Status_Log

    Logging Module /t# Sender Name /t# Data Size / t# Document Name /t# Document Format /t# Job ID /t# Virtual Printer Name /t# Message /t# Time / t# Network Protocol /t# Assigned Physical Printer /t# Plex /t# Plex Requested /t#...

  • Page 86: Rebooting And Restarting

    Troubleshooting Printing the Accounting log Print the Accounting log to gather information and recover from various accounting problems. Either the entire Accounting log or a portion of the log may be printed. Rebooting and restarting Recovery procedures throughout this guide instruct you to either reboot or restart the software.

  • Page 87: Loading Xdjc/Unix

    The # symbol appears again. If there are problems starting the software, check the console window for messages. Loading XDJC/Unix The Xerox Job Description Compiler is loaded by entering the following on the command line: /opt/XRXnps/bin/XDJC [-option[,option...]] <filename> ...

  • Page 88: Configuring Xdjc/Unix

    Troubleshooting • Vx: LPS PDL version number, x = 10, 2, 35, 3615, 37, 38, 39, 40, 50, 3A, M10 • PAPersizes: Papersize to use for PDL VM10, s = USLEGAL / USLETTER / A4 • DATed = d: Date format, d = US / EUROPEAN •...

  • Page 89: Output Files

    System Guide Output files Upon compilation of a JSL source file, the XDJC generates the following: • JSL source listing file <filename>.lst or <filename>.LST The filename is the name of the JSL file, excluding path information. The case of the file extension corresponds with the case of the file extension of the JSL source file.
  • Page 90 Troubleshooting 4. From the right-click menu, select [Eject/Unload]. This dismounts the floppty media, and protects the platform from damage caused by attempting to eject the media manually. 5. Select [OK] to close the “Removable Media Manager” window. 6. Now use the floppy eject button to eject the floppy diskette. 9-18 System Guide Common Controller...

  • Page 91: 10. Hints And Tips

    10. Hints and Tips General Disabling the Solaris 8 Screen Saver To disable the Solaris 8 Screen Saver: 1. Open a Terminal window. 2. Type the following path: cd /usr/openwin/bin 4. Type dtpower 6. Select Yes from the Scheme Confirmation window that opens.

  • Page 92: Color Systems

    Hints and Tips 4. Change the following line to “True:” Dtwm*useFrontPanel:False 5. Reboot the system. The CDE front panel will return. Color Systems General Comments The time required to process a job can depend on various influences. The time required to process a job is made up of 4 components: •...

  • Page 93: Time Required To Rip Pdl

    Image Quality Adjustments that the DC 2045/2060/6060 print engine makes during a job also impact the final performance of the printer as it generates paper. Job Submission Hints Number of Images...

  • Page 94: Job Submission Order

    RIPped and a large number of copies should be submitted at the end of the say if possible. With the printer paused, the job can then RIP over night. That job will then start printing the beginning of the next day and while it is printing, the DocuSP can process a complex/difficult job that takes a long time to RIP.

  • Page 95: Image Quality

    On DC 2045/2060/6060 there are certain scenarios where the printer will cycle down and do an Image Quality (IQ) adjustment. The % area coverage of the page (i.e. amount of image/text written on the page) also effects the number of IQ Adjustments that the printer will make.

  • Page 96: Job Printing Hints

    During the IQ adjustment, the printer will not print anything. However, the RIP will continue and be slightly ahead. As soon as the printer finishes the IQ adjustment it will print all of the RIPped pages and catch up with the printer.

  • Page 97: Xjdc Hints And Tips

    60 ppm, he can compute how far from the end of the job to release the printer so that RIP and print finish at the same time. XJDC Hints and Tips •...

  • Page 98: Pci Channel Interface Pwb Trace Capture Procedure

    Hints and Tips PCI Channel Interface PWB Trace Capture Procedure Load the PCI Channel Interface PWB Trace command when software is installed and the PCI Channel Interface PWB PWB is detected. This procedure is usually performed at the request of Software Engineering or as part of a SPAR package.

  • Page 99: Export The Trace File To Floppy

    System Guide Export the trace file to floppy To export the trace file to a floppy, perform the following: 1. Insert a blank, formatted floppy into the floppy drive. 2. Type volrmmount -i 3.and press <Enter>. 4. If you used the "compress" command above, type cp FileName.txt.Z /floppy/floppy0 5.
  • Page 100 Hints and Tips System Guide 10-10 Common Controller...

This manual is also suitable for:

Docuprint 135Docusp 3.6

Table of Contents