Table 119: Show Bridge Groups Details Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Meaning
Copyright © 2010, Juniper Networks, Inc.
host1#show bridge groups details
BridgeGroup: vplsA(vpls)
Bridge Mode:
Aging Time:
Learning:
Max Learn:
Link Status Snmp Traps: Disabled
Subscriber Policy:
Port Count:
Interface Count:
Transport Virtual Rtr:
Route Distinguisher:
SiteName:
SiteId:
Multi-homed:
Site-Priority:
SiteRange:
VPLS Route Targets
Route Target: RT:100:1 (both)
Route Target: RT:100:2 (both)
Flood Next Hop: Index 1048577
BridgeGroup: vplsB(vpls)
Bridge Mode:
Aging Time:
Learning:
Max Learn:
Link Status Snmp Traps: Disabled
Subscriber Policy:
Port Count:
Interface Count:
Transport Virtual Rtr:
Route Distinguisher:
SiteName:
SiteId:
Multi-homed:
SiteRange:
VPLS Route Targets
No Route Targets configured
Flood Next Hop: Index 1048578
Table 119 on page 623 lists the show bridge group details command output fields.

Table 119: show bridge groups details Output Fields

Field Name
BridgeGroup
Bridge Mode
Aging Time
default
300 secs
Enabled
Unlimited
default Subscriber
2
1
default
1.1.1.1:10
boston
1
Yes
45
10
default
300 secs
Enabled
Unlimited
default Subscriber
2
1
default
1.1.1.1:11
boston
1
No
20
Field Description
Name of the VPLS instance for which information is displayed
Bridging capability currently enabled; for a VPLS instance, this field
always displays default
Length of time, in seconds, that a MAC address entry can remain in
the forwarding table before expiring
Chapter 13: Monitoring VPLS
623