Family; Monitoring Bgp-Related Settings For Vpws L2Vpns - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x BGP and MPLS Configuration Guide
Clearing BGP Route Flap Dampening Information for the L2VPN Address Family
Clearing the Wait for the End-of-RIB Marker for the L2VPN Address Family
Related
Documentation

Monitoring BGP-Related Settings for VPWS L2VPNS

Purpose
672
Issue the clear ip bgp command and specify l2vpn vpws vpwsName.
host1#clear ip bgp l2vpn soft in
To clear BGP reachability information for all VPLS and VPWS instances in the L2VPN
address family:
Issue the clear ip bgp command and include the l2vpn all keywords.
host1#clear ip bgp l2vpn all soft in
Use the soft in keywords to trigger inbound soft reconfiguration.
To clear route flap dampening information for a specific VPWS instance in the L2VPN
address family:
Issue the clear ip bgp dampening command and specify l2vpn vpws vpwsName.
host1#clear ip bgp l2vpn dampening l2vpn vpws l2vpnBoston
To clear route flap dampening information for all VPLS and VPWS instances in the L2VPN
address family:
Issue the clear ip bgp dampening command and include the l2vpn all keywords.
host1#clear ip bgp l2vpn all dampening
To clear the wait for receiving an End-of-RIB marker from the peer for all VPWS instances
in the L2VPN address family:
Issue the clear ip bgp wait-end-of-rib command and specify l2vpn vpws vpwsName.
host1#clear ip bgp l2vpn vpws l2vpnBoston wait-end-of-rib
To clear the wait for receiving an End-of-RIB marker from the peer for all VPLS and VPWS
instances in the L2VPN address family:
Issue the clear ip bgp wait-end-of-rib command and include the l2vpn all keywords.
host1#clear ip bgp l2vpn all wait-end-of-rib
Configuring BGP Routing on page 3
clear ip bgp
clear ip bgp dampening
clear ip bgp wait-end-of-rib
This section provides examples of some of the show ip bgp commands that you can use
to monitor VPWS configurations.
Copyright © 2010, Juniper Networks, Inc.