Configuring Bgp-Mpls Applications; Overview - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12 Configuration Manual
Software for e series broadband services routers bgp and mpls configuration guide
Hide thumbs
Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12:
- Configuration manual (786 pages)
Table of Contents
Advertisement
CHAPTER 6
Configuring BGP-MPLS Applications
Overview
Copyright © 2010, Juniper Networks, Inc.
This chapter contains the following sections:
Overview on page 385
Platform Considerations on page 395
References on page 395
Transporting Packets Across an IP Backbone with MPLS on page 396
Configuring IPv6 VPNs on page 400
Intra-AS IPv6 VPNs on page 401
Providing IPv4 VPN Services Across Multiple Autonomous Systems on page 403
Providing IPv6 VPN Services Across Multiple Autonomous Systems on page 411
Using Route Targets to Configure VPN Topologies on page 412
Constraining Route Distribution with Route-Target Filtering on page 416
Multicast Services over VPNs on page 424
Configuring BGP VPN Services on page 424
Providing Internet Access to and from VPNs on page 464
Carrier-of-Carriers IPv4 VPNs on page 472
Carrier-of-Carriers IPv6 VPNs on page 478
Connecting IPv6 Islands Across IPv4 Clouds with BGP on page 479
OSPF and BGP/MPLS VPNs on page 482
Configuring VPLS on page 490
Configuring L2VPNs on page 490
NOTE: Before you read this chapter, we recommend you be thoroughly
familiar with both BGP and MPLS. For detailed information about those
protocols, see "Configuring BGP Routing" on page 3 and "Configuring MPLS"
on page 275.
385
Advertisement
Table of Contents
Troubleshooting
