Table 36: Show Ip Bgp Neighbors Dampened-Routes Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x BGP and MPLS Configuration Guide
Action
Meaning
186
To display information about routes with a dampening history for the specified BGP
neighbor:
host1#show ip bgp neighbors 192.168.1.158 dampened-routes
Local BGP identifier 192.168.1.232, local AS 100
120 routes (5760 bytes used), 94 distinct destinations (9024 bytes used)
67 routes selected for route table installation
23 path attribute entries (3450 bytes used)
Status codes: > best, * invalid, s suppressed, d dampened, r rejected
Prefix Peer
d12.8.12.0/24 192.168.1.158
d24.48.12.0/24 192.168.1.158
d24.72.12.0/24 192.168.1.158
d24.116.12.0/23 192.168.1.158
d24.143.12.0/24 192.168.1.158
d24.154.12.0/24 192.168.1.158
d24.216.12.0/24 192.168.1.158
d24.240.12.0/24 192.168.1.158
d24.244.12.0/22 192.168.1.158
d24.246.12.0/22 192.168.1.158
d61.0.12.0/24 192.168.1.158
d61.11.12.0/24 192.168.1.158
d62.74.12.0/22 192.168.1.158
d62.76.12.0/22 192.168.1.158
d63.65.12.0/24 192.168.1.158
d63.73.12.0/24 192.168.1.158
Table 36 on page 186 lists the show ip bgp neighbors dampened-routes command output
fields.

Table 36: show ip bgp neighbors dampened-routes Output Fields

Field Name
Local BGP identifier
local AS
routes
distinct destinations
routes selected for route
table installation
path attribute entries
Next-hop MED LocPrf Weight Origin
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
Field Description
BGP router ID of the local router
Local autonomous system number
Total number of routes stored in the BGP routing table and amount
of memory consumed by routes. If several peers have advertised a
route to the same prefix, all routes are included in this count.
Number of routes to unique prefixes stored in the BGP routing table.
If several peers have advertised a route to the same prefix, only the
best route is included in this count.
Number of routes in the BGP routing table that have been inserted
into the IP routing table
Number of distinct path attributes stored in BGP's internal path
attributes table. If BGP receives two routes for different prefixes
but with identical path attributes, BGP will create only one entry in
its internal path attribute table and share it between the two routes
to conserve memory.
0 IGP
0 IGP
0 inc.
0 IGP
0 IGP
0 inc.
0 IGP
0 IGP
0 IGP
0 IGP
0 IGP
0 IGP
0 IGP
0 IGP
0 inc.
0 IGP
Copyright © 2010, Juniper Networks, Inc.