Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 372

JunosE 11.3.x BGP and MPLS Configuration Guide
336
Table 67: show ldp interface Output Fields (continued)
Field Name
Interface address
Enabled with profile
Configured hold time
Hello interval
Hold time
Number of adjacencies
Link hello adjacency
label alloc
label learned
accum label alloc
accum label learned
last restart time
notf
msg
mapping
request
abort
release
withdraw
addr
Field Description
IP address of the interface, with address mask
Name of profile with which interface was enabled
Configured period for which a sending LSR maintains a record of
link hello messages from the receiving LSR without receipt of
another link hello message from that LSR, in seconds
Negotiated interval between link-hello packets, in seconds
Lowest configured hold time among all neighbors on the same
subnet, used as the effective hold time, in seconds
Number of LDP adjacencies for the interface
Address and transport address of the link hello adjacency; time
adjacency has been up in hh:mm:ss; remaining hold time for the
adjacency in seconds
Number of labels allocated and advertised to this peer
Number of labels received from this peer
Cumulative total number of labels allocated and advertised to this
peer
Cumulative total number of labels received from this peer
Time in hh:mm:ss since session last restarted
Number of notification messages received or received bad or sent
Number of messages received or received bad or sent
Number of label mapping messages received or received bad or
sent
Number of label request messages received or received bad or sent
Number of label abort messages received or received bad or sent
Number of label release messages received or received bad or sent
Number of label withdraw messages received or received bad or
sent
Number of address messages received or received bad or sent
Copyright © 2010, Juniper Networks, Inc.