Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 397

Copyright © 2010, Juniper Networks, Inc.
Table 81: show mpls rsvp Output Fields (continued)
Field Name
timeout
InLabel
Associated tunnel
PHopIntf
IncomingIntf
OutgoingIntf
PHopAddr
m_ipNextHopAddr
NextHop
LabelRange
SenderTSpec
Token Bucket Rate
Token Bucket Size
Peak Data Rate
Min Policed Unit
Max Packet Size
RRO
ADSPEC
IN ERO
OUT ERO
SES ATTR
Setup Pri
Hold Pri
Field Description
Period of time in milliseconds before PSB/RSB times out if no refresh
arrives.
Incoming label information
Tunnel identifier for minor interface for which the RSVP information
is displayed
Penultimate hop interface
Incoming interface
Outgoing interface
Penultimate hop address
Next hop address
Type of next hop (loose, strict, session)
RSVP session label range
Traffic parameters for the sender
Sender's description of generated traffic, in kbps
Sender's description of generated traffic, in kbps
Lender's peak traffic generation rate
Minimum packet size generated by sender
Maximum packet size generated by sender
Record route object
Indicates presence of this QoS object
Incoming explicit route object
Outgoing explicit route object
RSVP session attributes
Setup priority of tunnel
Hold priority of tunnel
Chapter 5: Monitoring MPLS
361