Monitoring Vpls-Specific Settings; Table 130: Show Mpls Forwarding Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x BGP and MPLS Configuration Guide
Related
Documentation

Monitoring VPLS-Specific Settings

Purpose
Action
640

Table 130: show mpls forwarding Output Fields

Field Name
In label
Out label
Label space
Owner
Spoof check
Action
in pkts
in Octets
in errors
in discardPkts
show mpls forwarding
To display information about all VPLS instances configured on the router.
To display detailed information about all VPLS instances configured on the router:
host1:ce3#show vpls connections
BridgeGroup: vpls1(vpls)
SiteName:
SiteId:
Transport Virtual Rtr:
Multihomed priority:
Connections status code:
UP = Operational
SC = Local and Remote Site Identifier Collision
EM = Encapsulation Mismatch
OR = Out of Range
DN = VC Down because Remote PE Unreachable
LD = Local Site Down
RD = Remote Site Down
Field Description
Label sent to upstream neighbor for route
Label received from downstream neighbor for route
Label space in which the label is assigned
Signaling protocol that placed the label in the forwarding table:
BGP, LDP, or RSVP-TE
Type and location of spoof checking performed on the MPLS packet,
router, or interface
Action taken for MPLS packets arriving with that label
Number of packets sent with the label
Number of octets sent with the label
Number of packets that are dropped for some reason before being
sent
Number of packets that are discarded due to lack of buffer space
before being sent
bangalore
1
pe1
200
Copyright © 2010, Juniper Networks, Inc.