Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 536

Software for e series broadband services routers bgp and mpls configuration guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12:
Table of Contents

Advertisement

JunosE 11.3.x BGP and MPLS Configuration Guide
500
100:1
Export VPN Route Target Extended Communities:
100:1
IPv4 Import Route-map: my-v4-import-map
IPv6 Import Route-map: my-v6-import-map
IPv4 Export Route-map: my-v4-export-map (can not filter routes)
IPv6 Export Route-map: my-v6-export-map (can filter routes)
IPv4 Global Import Route-map: my-v4-global-import-map (max routes 5000)
IPv6 Global Import Route-map: my-v6-global-import-map (max routes 1000)
IPv4 Global Export Route-map: my-global-v4-export-map
IPv6 Global Export Route-map: my-global-v6-export-map
VRF
pe12; Default RD 100:12
VRF IP Router Id: 10.12.12.1
Default TTL: 127
Reassemble Timeout: 30
Interface Configured:
null0
ATM2/0.12
tun mpls:vpnEgL18-4
Import VPN Route Target Extended Communities:
100:2
Export VPN Route Target Extended Communities:
100:2
Import Route-map : importmap1
Export Route-map : exportmap23 (can filter routes)
Global Import Route-map : globalimportmap2
Global Export Route-map : globalexportmap3
VRF
pe13; Default RD 100:13
VRF IP Router Id: 10.13.13.1
Default TTL: 127
Reassemble Timeout: 30
Interface Configured:
null0
ATM2/0.13 tun mpls:vpnEgL19-5 ip dyn-26
Import VPN Route Target Extended Communities:
100:3
Export VPN Route Target Extended Communities:
100:3
No Import Route-map
No Export Route-map
No Global Import Route-map
No Global Export Route-map
To display summary information about all interfaces associated with all VRFs configured
in a virtual router:
host1:PE1#show ip vrf interfaces
Interface
IP-Address
null0
255.255.255.255/32
atm4/0.134
4.4.4.2/24
null0
255.255.255.255/32
ip0
6.6.6.8/24
null0
255.255.255.255/32
loopback1
7.7.7.2/24
To display detailed information about the interfaces:
host1:PE1#show ip vrf interfaces detail
null0 is up, line protocol is up
VRF: pe11
Link up/down trap is disabled
Internet address is 255.255.255.255/255.255.255.255
IP statistics:
Rcvd:
0 local destination
ip dyn-25
Status Protocol
VRF
up
up
pe11
up
up
pe11
up
up
pe12
up
up
pe12
up
up
pe13
up
up
pe13
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents