Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 402

JunosE 11.3.x BGP and MPLS Configuration Guide
366
Table 84: show mpls rsvp counters Output Fields (continued)
Field Name
Path Tear Rcvd
Resv Sent
Resv Rcvd
Resv Error Sent
Resv Error Rcvd
Resv Tear Sent
Resv Tear Rcvd
Resv Conf Sent
Resv Conf Rcvd
Srefresh Conf Sent
Srefresh Conf Rcvd
Ack Conf Sent
Ack Conf Rcvd
Nack Objects Sent
Nack Objects Rcvd
Msg Bundles Objects Sent
Msg Bundles Rcvd
Error Msgs Rcvd
Misordered Messages
Send Failures
Path Triggers
Resv Triggers
Forwarded Pkts
Hello Sent
Field Description
Number of pathtear messages received on the interface
Number of resv messages sent on the interface
Number of resv messages received on the interface
Number of resverr messages sent on the interface
Number of resverr messages received on the interface
Number of resvtear messages sent on the interface
Number of resvtear messages received on the interface
Number of resvconf messages sent on the interface
Number of resvconf messages received on the interface
Number of srefresh messages sent on the interface
Number of srefresh messages received on the interface
Number of resvconf messages sent on the interface
Number of resvconf messages received on the interface
Number of nack objects sent on the interface
Number of nack objects received on the interface
Number of message bundles sent on the interface
Number of message bundles received on the interface
Number of error messages received on the interface
Number of misordered messages received on the interface
Number of failures to successfully send messages on the interface
Number of locally triggered path messages
Number of locally triggered resv messages
RSVP control packets that are forwarded through the router
Number of hello messages sent
Copyright © 2010, Juniper Networks, Inc.