Mpls Terms And Acronyms; Border Gateway Protocol; Table 50: Mpls Terms And Acronyms - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Software for e series broadband services routers bgp and mpls configuration guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - BGP AND MPLS CONFIGURATION GUIDE 2010-10-12:
Table of Contents

Advertisement

JunosE 11.3.x BGP and MPLS Configuration Guide

MPLS Terms and Acronyms

212
Table 50 on page 212 defines terms and acronyms that are used in this discussion of
MPLS.

Table 50: MPLS Terms and Acronyms

Term
Admission control
BGP
Branch node
Constraint-based routing
E-LSP
Explicit routing
FEC
Label Distribution
Protocol
Leaf
LDP
LER
Definition
Accounting mechanism that tracks resource information. Prevents
requests from being accepted if sufficient resources are not available.
Border Gateway Protocol, which provides loop-free interdomain
routing between autonomous systems (ASs) and can act as a label
distribution protocol for MPLS.
An LSR in a point-to-multipoint LSP that is not an ingress node or
an egress node. A branch node can be connected to other branch
nodes, an ingress node, or an egress node.
A mechanism to establish paths based on certain criteria (explicit
route, QoS parameters). The standard routing protocols can be
enhanced to carry additional information to be used when running
the route calculation.
EXP-inferred-PSC LSP. The EXP field of the MPLS Shim Header is
used to determine the per-hop behavior applied to the packet.
A subset of constraint-based routing where the constraint is an
explicit route
Forwarding equivalence class—Group of IP packets forwarded over
the same path with the same path attributes applied
A particular label distribution protocol used for label distribution
among the routers in an MPLS domain; represented by the
acronym LDP
In lowercase—label distribution protocol—a generic term for any
of several protocols that distribute labels among the routers in an
MPLS domain, including BGP, LDP, and RSVP-TE. This usage is
not represented in this text by the acronym, LDP.
Egress LSRs in a point-to-multipoint LSP. It is also referred as a leaf
node.
Label Distribution Protocol—A particular protocol used for label
distribution among the routers in an MPLS domain
This text does not use LDP to refer to the generic class of label
distribution protocols.
Label edge router—A label-switching router serving as an ingress or
egress nodes
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents