Table of Contents
Advertisement
Basic Troubleshooting
The following steps can be used for troubleshooting basic connectivity issues with your switch.
• Reset the switch
• Factory reset the switch by holding the factory reset button for 5 seconds
• Try switching cables, or testing your cable on another device
If your switch still does not connect, the following link may be useful, depending on your issue:
Reference
https://documentation.meraki.com/MS
If you are still experiencing hardware issues, please contact Cisco Meraki support by logging in to dashboard and using the Help option near the top of the page,
then opening and email case or calling using the contact information on that page.
Warranty
MS Warranty coverage periods are as follows:
Time
All manuals and user guides at all-guides.com
for additional information and troubleshooting tips.
Comments
Troubleshooting an MS Switch
6
Advertisement
Table of Contents
