Table of Contents
Advertisement
B.1 Entering the User Settings Menu & Selecting a Setting Option
The following procedure describes how to enter and move within the User Settings menu.
Detailed descriptions of the User Setting options are provided at the end of the procedure.
To exit the User Settings menu – see section B.3.
1. You can enter the "User Settings" menu only when the system is disarmed.
2. Carefully read the section titled "Additional Information" according to the indicated references
table at end of this section.
A. To Enter the User Settings Menu
a) Make sure the system is disarmed and then press the
button repeatedly until the display reads "USER SETTINGS".
b) When the display reads [USER SETTINGS], press
The screen will now prompt you to enter your user code.
Enter your User Code.
The display reads the first Setting option of the User Settings menu
3
[SET BYPASS].
B. To Select a Setting Option
Click the
setting option, for example, "Time & Format".
When the desired setting option appears on the display, press the
I
OK
button to enter the setting process.
The remainder of the procedures for the selected setting options 1 to 13
is provided in sections C.1 to C.13.
Display shown in disarm state when all zones are secured (00:00 or other digits show present time).
1
a. If you have not already changed your personal code number, use the default setting – 1111.
2
b. The Master User has access to all User Settings options. All other users have access only to the
Bypass options.
The bypass options will be displayed in the User Settings menu only if enabled by the installer. Otherwise,
3
the first user setting option displayed will be [
D-302757
2
or
button until the display reads the desired
Additional Information (section B.1)
MENUS AND FUNCTIONS
1
I
OK
.
].
Private Report
1
etc – see
READY 00:00
USER SETTINGS
I
OK
ENTER CODE: XXXX
CODE
SET BYPASS
or
TIME & FORMAT
I
OK
Continue to the selected
setting option
15
Advertisement
Table of Contents
