Timer - FUTABA 3GR-2.4G Instruction Manual

Use the timer by selecting from UP Timer or DOWN timer.
UP TIMER function
- The UP TIMER can be used to count the time between start and stop.
- The timer repeatedly starts and stops each time the switch is operated and
accumulates the time between each start and stop.
- The first start operation can be linked to the throttle stick.
- An alarm sound can be set.
DOWN TIMER function
- The DOWN TIMER can be used to count the time between start and stop. (The
time remaining is displayed.)
- Start and stop are repeated at each switch operation and the time between each start
and stop is counted down and displayed. The start time becomes the alarm set time.
(When the count reaches 00 minute 00 second, the down timer operates like an up

timer.)

- The first start operation can linked with the throttle trigger.
- An alarm sound can be set.
Calling the setup screen
(Initial screen)
Press "SEL" key to select the
desired function screen.
Timer setup
(Preparation)
- Use the function select switch function (page 54) to select the switch.
(SW1: Select the "TM" in the above function.)
1
(Timer selection)
Select setup item "TYP" and use the (+) and (-) buttons to select the timer
type.
2
(Alarm time setup)
Select setup item "ALM-TM" and use the (+) and (-) buttons to set the
alarm time.
Timer / TIMER
(Setup screen)
Setup items
TYP: Timer selection
ALM-TM: Alarm time setup
Press "CH" key to select the next set-
up screen.
Timer type
TYP-UP: UP timer
TYP-DN: DOWN timer
Alarm time
1 ~ 100 min.
Initial value: 4 min.
49