Servo Reverse; Throttle Atv; Steering D/R - FUTABA 2PEKA Instruction Manual

This function reverses the rotation direction of the Steering and
Throttle servos.
When the trim position deviates from the center, the de-
viation will be on the opposite side when the servo is
reversed.
This function is used to adjust the forward and brake side servo
travel. Each direction can be adjusted independent of each
other. Use this feature to set the throttle servo travel.
Warning
Be sure that your throttle linkage does not apply
excessive force to the servo.
If your linkage installation causes an unreasonable
amount of force to be applied to the servo. The servo
may be damaged and result in loss of control.
Use this function to adjust the steering travel of your
model. If the model understeers (push) while cornering,
add steering by turning the dial clockwise.
When the model oversteers (loose), take away steering
by turning the dial counterclockwise.
14

Servo Reverse

Throttle ATV

Steering D/R

Steering
ST.
N
N Side: Normal
R Side: Reverse
R
SERVO
REV SW
Throttle
N
N Side: Normal
R Side: Reverse
R
TH.
(Reversing Switches)
HIGH
High Side
0 Side: Travel Minimum
10 Side: Travel Maximum
TH.
ATV
Low Side
0 Side: Travel Minimum
10 Side: Travel Maximum
LOW
(Throttle ATV)
F R E Q U E N C Y
M O D U L AT I O N
Steering D/R
Travel Travel
Minimum Maximum