Status Menu; Status Messages Screen - Cisco 7961G - IP Phone VoIP Administration Manual

Status Menu

Status Messages Screen

Step 1
Step 2
Step 3
Table 7-2 Status Messages on the Cisco Unified IP Phone
Message
BootP server used
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
7-4
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
The Status Messages screen displays up to the 10 most recent status messages that
the phone has generated. You can access this screen at any time, even if the phone
has not finished starting up.
appear. This table also includes actions you can take to address errors that are
indicated.
To display the Status Messages screen, follow these steps:
Procedure
Press the Settings button.
Select Status.
Select Status Messages.
To remove current status messages, press the Clear softkey.
To exit the Status Messages screen, press the Exit softkey.
Description
The phone obtained its IP
address from a BootP server
rather than a DHCP server.
Table 7-2 describes the status messages that might
Possible Explanation and Action
None. This message is informational only.
OL-11528-01