Overview Of Configuring And Installing Cisco Unified Ip Phones; Configuring Cisco Unified Ip Phones In Cisco Unified Callmanager - Cisco 7961G - IP Phone VoIP Administration Manual

Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco
Unified IP Phones
Configuring Cisco Unified IP Phones in Cisco Unified
CallManager
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
When deploying a new IP telephony system, system administrators and network
administrators must complete several initial configuration tasks to prepare the
network for IP telephony service. For information and a checklist for setting up
and configuring a complete Cisco IP telephony network, refer to the "System
Configuration Overview" chapter in Cisco Unified CallManager System Guide.
After you have set up the IP telephony system and configured system-wide
features in Cisco Unified CallManager, you can add IP phones to the system.
The following topics provide an overview of procedures for adding
Cisco Unified IP Phones to your network:

Configuring Cisco Unified IP Phones in Cisco Unified CallManager,

•
page 1-21
Installing Cisco Unified IP Phones, page 1-26
•
To add phones to the Cisco Unified CallManager database, you can use:
Auto-registration
•
• Cisco Unified CallManager Administration
Bulk Administration Tool (BAT)
•
BAT and the Tool for Auto-Registered Phones Support (TAPS)
•
For more information about these choices, see the
Unified CallManager Database" section on page
For general information about configuring phones in Cisco Unified CallManager,
refer to the "Cisco Unified IP Phone" chapter in Cisco Unified CallManager
System Guide.

Overview of Configuring and Installing Cisco Unified IP Phones

2-12.
"Adding Phones to the Cisco
1-21