Cisco 7961G - IP Phone VoIP Administration Manual page 116

Network Configuration Menu
Table 4-2 Network Configuration Menu Options (continued)
Option Description
PC Port Speed and duplex of the access port
Configuration (labeled 10/100 PC on the 7961G and
7941G; labeled 10/100/100 PC on the
7961G-GE and 7941G-GE). Valid
values:
•
•
•
•
•
•
If the phone is connected to a switch,
configure the port on the switch to
the same speed/duplex as the phone,
or configure both to auto-negotiate.
If you change the setting of this
option, you must change the SW Port
Configuration option to the same
setting.
PC VLAN Allows the phone to interoperate
with third-party switches that do not
support a voice VLAN.
The Admin VLAN ID option must be
set before using this option.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
4-14
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half
duplex
100 Full—100-BaseT/full
duplex
1000 Full—1000-BaseT/full
duplex
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Unlock network configuration options.
1.
Scroll to the PC Port Configuration
2.
option and then press the Edit softkey.
Scroll to the setting that you want and
3.
then press the Select softkey.
Press the Save softkey.
4.
1. Unlock network configuration options.
Make sure the Admin VLAN ID is set
2.
(see Admin VLAN ID above in this
table).
Scroll to the PC VLAN option, press
3.
the Edit softkey, and then enter a new
PC VLAN setting.
Press the Validate softkey and then
4.
press the Save softkey.
OL-11528-01