Installing The Cisco Unified Ip Phone - Cisco 7961G - IP Phone VoIP Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone

Installing the Cisco Unified IP Phone

Procedure
Step 1
Connect the handset to the
Handset port.
Step 2
Connect a headset to the
Headset port.
Step 3 Connect the power supply to the
Cisco DC Adapter port.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
You must connect the Cisco Unified IP Phone to the network and to a power
source before using it. See
connections.
To install a Cisco Unified IP Phone, perform these steps:
Notes
—
Optional. You can add a
headset later if you do not
connect one now.
Optional.
Installing the Cisco Unified IP Phone
Figure 3-1 for a graphical representation of the
Reference
—
See the "Headset" section on
page 3-6 for supported
headsets.
See the "Adding Phones to
the Cisco
Unified CallManager
Database" section on
page 2-12 for guidelines.
3-9