Cisco 7961G - IP Phone VoIP Administration Manual page 113

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
DNS Server 1 Primary Domain Name System
(DNS) server (DNS Server 1) and
DNS Server 2
optional backup DNS servers (DNS
DNS Server 3
Server 2–5) used by the phone.
DNS Server 4
DNS Server 5
Operational Auxiliary Virtual Local Area
VLAN ID Network (VLAN) configured on a
Cisco Catalyst switch in which the
phone is a member.
If the phone has not received an
auxiliary VLAN, this option
indicates the Administrative VLAN.
If neither the auxiliary VLAN nor the
Administrative VLAN are
configured, this option is blank.
Admin. VLAN Auxiliary VLAN in which the phone
ID is a member.
Used only if the phone does not
receive an auxiliary VLAN from the
switch, ignored otherwise.
DHCP Enabled Indicates whether DHCP is being
used by the phone.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
Network Configuration Menu
To Change
Unlock network configuration options.
1.
Set the DHCP Enabled option to No.
2.
Scroll to the appropriate DNS Server
3.
option, press the Edit softkey, and then
enter a new DNS server IP address.
Press the Validate softkey.
4.
5. Repeat Steps 3 and 4 as needed to
assign backup DNS servers.
Press the Save softkey.
6.
The phone obtains its Operational VLAN
ID via Cisco Discovery Protocol (CDP)
from the switch to which the phone is
attached. To assign a VLAN ID manually,
use the Admin VLAN ID option.
Unlock network configuration options.
1.
Scroll to the Admin. VLAN ID option,
2.
press the Edit softkey, and then enter a
new Admin VLAN setting.
Press the Validate softkey and then
3.
press the Save softkey.
Unlock network configuration options.
1.
Scroll to the DHCP Enabled option and
2.
press the No softkey to disable DHCP,
or press the Yes softkey to enable
DHCP.
Press the Save softkey.
3.
4-11