Cisco 7961G - IP Phone VoIP Administration Manual page 141

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Auto Answer
Auto-pickup
Barge
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
Description
Connects incoming calls automatically after
a ring or two.
Auto Answer works with either the speaker-
phone or headset.
Allows a user to use one-touch, pickup
functionality for call pickup, group call
pickup, and other group call pickup.
Allows a user to join a non-private call on a
shared phone line. Barge features include
cBarge and Barge.
cBarge adds a user to a call and
•
converts it into a conference, allowing
the user and other parties to access con-
ference features.
Barge adds a user to a call but does not
•
convert the call into a conference.
The phones support Barge in two confer-
ence modes:
Built-in conference bridge at the target
•
device (the phone that is being barged).
This mode uses the Barge softkey.
Shared conference bridge. This mode
•
uses the cBarge softkey.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, refer to
Cisco Unified CallManager Ad-
ministration Guide, "Configuring
Directory Numbers" chapter.
For more information, refer to:
Cisco Unified CallManager
•
Administration Guide,
"Pickup Group Configuration"
chapter.
Cisco Unified CallManager
•
System Guide, "Call Pickup
and Group Call Pickup"
chapter.
For more information, refer to:
Cisco Unified CallManager
•
Administration Guide, "Cisco
Unified IP Phone Configura-
tion" chapter.
Cisco Unified CallManager
•
System Guide, "Cisco Unified
IP Phones" chapter.
Cisco Unified CallManager
•
Features and Services Guide,
"Barge and Privacy" chapter.
5-3