Status Menu - Cisco 7961G - IP Phone VoIP Administration Manual

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-1 Model Information Settings (continued)
Option Description
LSC Indicates whether a locally significant
certificate (used for the security
features) is installed on the phone or is
not installed on the phone.
Call Control Indicates the call processing protocol
Protocol used by the phone.

Status Menu

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
The Status menu includes theses options, which provide information about the
phone and its operation:
Status Messages—Displays the Status Messages screen, which shows a log
•
of important system messages. For more information, see the
Messages Screen" section on page
• Network Statistics—Displays the Network Statistics screen, which shows
Ethernet traffic statistics. For more information, see the
Screen" section on page
Firmware Versions—Displays the Firmware Versions screen, which shows
•
information about the firmware running on the phone. For more information,
see the "Firmware Versions Screen" section on page
Expansion Modules—Displays the Expansion Module(s) screen, which
•
shows information about the Cisco Unified IP Phone Expansion Module
7914, if connected to the phone. For more information, see the
Module Status Screen" section on page
802.1X Authentication Status—Displays the time-stamped authentication
•
successes and failures. For more information, see the
Authentication on Cisco Unified IP Phones" section on page
To display the Status menu, press the Settings button and then select Status.
To exit the Status menu, press the Exit softkey.
To Change
For more information about how to
manage the LSC for your phone, refer to
the "Using the Certificate Authority
Proxy Function" section in Cisco Unified
CallManager Security Guide.
See the "Using Cisco Unified IP Phones
with Different Protocols" section on
page 2-17.
7-4.
7-13.
7-16.
Status Menu
"Status
"Network Statistics
7-15.
"Expansion
"Supporting 802.1X
1-18.
7-3