Security Configuration Menu
Table 4-14 802.1X Authentication Real-Time Status
Option
802.1X
Authentication Status
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
4-36
You can access the 802.1X Authentication Real-Time Stats by pressing the
Settings button and choosing Security Configuration > 802.1X Authentication
Status. To exit this menu, press the Exit key.
Description
Real-time progress of the 802.1X
authentication status, displaying
one of the following states:
Disabled—802.1X is disabled
•
and transaction was not
attempted
Disconnected—Physical link
•
is down or disconnected
Connecting—Trying to
•
discover or acquire the
authenticator
Acquired—Authenticator
•
acquired, awaiting
authentication to begin
Authenticating—Authentication
•
in progress
Authenticated—Authentication
•
successful or implicit
authentication due to timeouts
Held—Authentication failed,
•
waiting before next attempt
(approximately 60 seconds)
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
Display only—Cannot configure.
OL-11528-01