Cisco 7961G - IP Phone VoIP Administration Manual page 96

Adjusting the Placement of the Cisco Unified IP Phone
Before You Begin
To ensure that the handset attaches securely to a wall-mounted phone, remove the
handset wall hook from the handset rest, rotate the hook 180 degrees, and reinsert
the hook. Turning the hook exposes a lip on which the handset catches when the
phone is vertical. For an illustrated procedure, refer to Installing the Wall Mount
Kit for the Cisco Unified IP Phone.
Use care not to damage wires or pipes located inside the wall when securing
Caution
screws to wall studs.
Procedure
Push in the footstand adjustment button.
Step 1
Adjust the footstand so it is flat against the back of the phone.
Step 2
Insert two screws into a wall stud, matching them to the two screw holes on the
Step 3
back of the footstand.
The keyholes fit standard phone jack mounts.
Hang the phone on the wall.
Step 4
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
3-16
Chapter 3 Setting Up the Cisco Unified IP Phone
OL-11528-01