Network Configuration Menu - Cisco 7961G - IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Network Configuration Menu

Table 4-2 Network Configuration Menu Options
Option Description
DHCP Server IP address of the Dynamic Host
Configuration Protocol (DHCP)
server from which the phone obtains
its IP address.
BOOTP Server Indicates whether the phone obtains
its configuration from a Bootstrap
Protocol (BootP) server instead of
from a DHCP server.
MAC Address Unique Media Access Control
(MAC) address of the phone.
Host Name Unique host name that the DHCP
server assigned to the phone.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
Unlocking and Locking Options, page 4-4
•
Editing Values, page 4-4
•
Network Configuration Menu, page 4-7
•
Device Configuration Menu, page 4-15
•
The Network Configuration menu provides options for viewing and making a
variety of network settings.
applicable, explains how to change them.
For information about how to access the Network Configuration menu, see the
"Displaying a Configuration Menu" section on page
Before you can change an option on this menu, you must unlock options as
described in the "Unlocking and Locking Options" section on page
Yes, or No softkeys for changing network configuration options appear only if
options are unlocked.
For information about the keys you can use to edit options, see the
Values" section on page
Table 4-2 describes these options and, where
4-4.
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Network Configuration Menu
4-2.
4-4. The Edit,
"Editing
4-7