Handset; Speakerphone; Headset - Cisco 7961G - IP Phone VoIP Administration Manual

Understanding the Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Components

Handset

Speakerphone

Headset

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
3-6
The handset is designed especially for use with a Cisco Unified IP Phone. It
includes a light strip that indicates incoming calls and voice messages waiting.
To connect a handset to the Cisco Unified IP Phone, plug the cable into the
handset and the Handset port on the back of the phone.
By default, the speakerphone is enabled on the Cisco Unified IP Phone.
You can disable the speakerphone through the Cisco Unified CallManager
Administration application. To do so, choose Device > Phone and locate the
phone you want to modify. In the Phone Configuration web page for the phone,
check the Disable Speakerphone check box.
Although Cisco Systems performs some internal testing of third-party headsets
for use with the Cisco Unified IP Phones, Cisco does not certify or support
products from headset or handset vendors. Because of the inherent environmental
and hardware inconsistencies in the locations where Cisco Unified IP Phones are
deployed, there is not a single "best" solution that is optimal for all environments.
Cisco recommends that customers test the headsets that work best in their
environment before deploying a large number of units in their network.
In some instances, the mechanics or electronics of various headsets can cause
remote parties to hear an echo of their own voice when they speak to
Cisco Unified IP Phone users.
Cisco Systems recommends the use of good quality external devices, like headsets
that are screened against unwanted radio frequency (RF) and audio frequency
(AF) signals. Depending on the quality of these devices and their proximity to
other devices such as cell phones and two-way radios, some audio noise may still
occur. See the "Using External Devices with Your Cisco Unified IP Phone"
section on page 3-8 for more information.
Chapter 3 Setting Up the Cisco Unified IP Phone
OL-11528-01