Cisco 7961G - IP Phone VoIP Administration Manual page 90

Installing the Cisco Unified IP Phone
Procedure
Step 4
Connect a Category 3 or 5
straight-through Ethernet cable
from the switch to the network
port labeled 10/100 SW on the
Cisco Unified IP Phone
7961G/7941G, or to the network
port labeled 10/100/1000 SW on
the Cisco Unified IP Phone
7961G-GE/7941G-GE.
Step 5 Connect a Category 3 or 5
straight-through Ethernet cable
from another network device,
such as a desktop computer, to
the access port labeled 10/100
PC port on the
Cisco Unified IP Phone
7961G/7941G, or to the access
port labeled 10/100/1000 PC on
the Cisco Unified IP Phone
7961G-GE/7941G-GE.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
3-10
Chapter 3
Notes
Each
Cisco Unified IP Phone
ships with one Ethernet
cable in the box.
Optional. You can connect
another network device later
if you do not connect one
now.
Setting Up the Cisco Unified IP Phone
Reference
See the "Network and
Access Ports" section on
page 3-5 for guidelines.
See the "Network and
Access Ports" section on
page 3-5 for guidelines.
OL-11528-01