Warnings For The Patient Transport; Caution; Medical Devices For Use With Colibrì System - Eurosets COLIBRI SYSTEM Instructions For Use Manual

1.11.3. WARNINGS FOR THE PATIENT TRANSPORT

•
If the patient is repositioned or transported, there is a risk of decannulation caused by strain on
the tubing and mechanical damage. The greatest care should therefore be exercised when carrying
out the safety measures.
•
COLIBRÌ SYSTEM can be used for intra-hospital and inter-hospital patient transport
Before transporting the patient, make sure that there is sufficient oxygen in the gas bottle
o
and COLIBRÌ Console batteries are charged.
o Take care during transportation in confined spaces, such as doorways and elevators.
Prevent the patient cooling down during transportation (e.g. with aluminum foil or heating
o
mats), if it is not possible to connect a heater-cooler unit.

1.11.4. CAUTION

•
This device is made of precision components. Do not drop it or subject it to strong impact.
Never attempt to disassemble it.
•
Do not wet the device except when cleaning the outer casing as described in Cleaning section.
•
Only use the power supply cord provided.
•
Any attempt to modify the COLIBRÌ System hardware or software without EUROSETS express
written approval automatically voids all warranties and liabilities.
•
Never operate the Disposable Centrifugal Pump without liquid.
•
Avoid mechanical impacts and knocks.
1.12. MEDICAL DEVICES FOR USE WITH COLIBRÌ SYSTEM
COLIBRÌ System is conceived to be used in combination with Eurosets Disposable Centrifugal Pump, Tubing Sets
and Oxygenators. Alternatively, other commercially available (CE Marked) Tubing Sets and/or oxygenators
approved for the concerned application may be used. COLIBRÌ System can be used also in combination with
ECMOLIFE System.
Check device intended purpose, max use period and technical features, available on instructions for use for each
medical device to ensure suitability of the device for the intended purpose.
Eurosets Disposable Centrifugal Pump is available in the following configurations:
•
ECMOLIFE Centrifugal Pump standard model, present as standalone product ref. AG5078, or included in
perfusion tubing sets;
•
ECMOLIFE Centrifugal Pump with P
only, permanently connected with pressure monitoring probe;
•
NEW BORN Centrifugal Pump standard model, present as standalone product ref. AG5087, or included in
perfusion tubing sets;
•
NEW BORN Centrifugal Pump with P
only, permanently connected with pressure monitoring probe.
Warning
For each medical device used in combination with COLIBRI System instructions for use shall be
consulted.
en
port located on blood inlet port, included in perfusion tubing sets
drain
port located on blood inlet port, included in perfusion tubing sets
drain
9