Combination System Ecmolife-Colibri; Colibrì-Ecmolife Connection - Eurosets COLIBRI SYSTEM Instructions For Use Manual

7. COMBINATION SYSTEM ECMOLIFE-COLIBRI

It is possible to use the Colibrì system in combination with the Primary section of ECMOLIFE System.
•
The combined system must be used in accordance with these instructions and EU10583 IFU
ECMOLIFE SYSTEM. EUROSETS cannot be held responsible for damage deriving from improper
use.
•
Read these instructions together with DISPOSABLE Centrifugal Pump instructions for use and
Ecmolife System instruction for use carefully before use.
•
The device is intended for use in the hospital and institutional environment where healthcare
professionals provide patient care. The device is intended for use by properly trained personnel
under the direct supervision of a licensed physician.
•
Do not use the device if the package is damaged.
•
The product may only be operated and monitored by qualified medical staff.
•
The incorrect reuse and reprocessing can compromise the electrical safety of the device and result
in electric shock, insufficient insulation, and an unintended increase in the temperature of the
device.
•
Only use the ECMOLIFE-COLIBRÌ System as the drive for the ECMOLIFE CENTRIFUGAL PUMP
SYSTEM.
•
Have a replacement set at the ready.
•
Always keep 4 metal tube clamps at the ready.
•
Electromagnetic interference:
Do not use the ECMOLIFE-COLIBRÌ system in the proximity of equipment not sufficiently
o
screened from electromagnetic emissions higher than those indicated in IEC 60601-1-
2:2014+AMD1:2020.
This system may cause radio interference or may interfere with operation of nearby equipment,
o
and mitigation measures may therefore be necessary, such as reorienting or relocating the
ECMOLIFE-COIBRÌ System or shielding the environment.
•
Stop immediately the use of the system through the emergency switch button in case of fire/smoke
from the device.
7.1. COLIBRÌ-ECMOLIFE CONNECTION
MECHANICAL CONNECTION.
1. Move the lever of the COLIBRÌ bracket to the
'OPEN' position.
2. Insert the COLIBRÌ Bracket into the support
plate on the wall of the ECMOLIFE Console
facing the two stand poles.
3. Move the lever of the COLIBRÌ bracket to the
'CLOSED' position in order to fix the
COLIBRI' Console
Console.
32
on the ECMOLIFE
en