Boot Setup Peripherals Menu - NEC Versa 2500 Series Service Manual

Hide thumbs Also See for Versa 2500 Series:
Table of Contents

Advertisement

1-16
Introduction
Item
POST Errors
Keyboard Features
Num Lock
Keyboard Repeat
Rate
Keyboard Auto-
Repeat Delay
Item
Serial Port
Infrared Serial Port
Parallel Port
Parallel Mode
Diskette Controller
IDE Adapter
On Board Audio
I/O Channel
IRQ Channel
DMA Channel
MPU I/O
Game Port
Display to TV
Plug & Play O/S
Table 1-4 Boot Main Setup Menu (cont'd)
Function
This options allow the system to pause and display the error
message at boot attempt.
Selects keyboard options.
This option toggles the Num Lock key on or off.
This option allows you to select the auto-repeat key speed.
Possible values include 2, 6, 10, 13.3, 18.5, 21.8, 26.7, or 30
seconds.
This option allows you to select the delay before repeat.
Possible values include 1/4, 1/2, 3/4 and 1 second.
Table 1-5 Boot Setup Peripherals Menu
Function
This option allows you to configure the notebook's serial port
as either (3F8-IRQ4), (2F8-IRQ3), (3E8-IRQ4), (2E8-IRQ3),
or disabled. The default setting is (3F8-IRQ4).
This option allows you to configure the notebook's infrared
serial port as either (3F8-IRQ4), (2F8-IRQ3), (3E8-IRQ4),
(2E8-IRQ3), or disabled. The default is (2F8-IRQ3).
This option allows you to configure the notebook's parallel
port as either (378-IRQ5), (3BC-IRQ7), (278-IRQ5), (378-
IRQ7), or none. The default is (378-IRQ7).
This option allows you to configure the notebook's parallel
mode as either Unidirectional, Bi-directional, Enhanced, or
ECP. The default is ECP.
This option disables the floppy disk controller.
This option disables the IDE adapter.
This option disables the on-board audio.
Changes the default value of 220h to 230h, 240h or 250h.
Changes the default value of IRQ5 to IRQ7, IRQ9 or IRQ10.
Changes the default value of CH0 to CH1 or CH3.
Changes the default value of 300h to 310h, 320h or 330h.
This option allows you to enable or disable the game port.
Changes the default value of disabled to PAL or NTSC.
Select "Yes" if a Plug and Play capable operating system is
installed.

Advertisement

Table of Contents
loading

Table of Contents