Peripherals Setup - NEC VERSA 6060 Service Manual

2-28 Setup and Operation
T
Standby Timeout
You can specify when the system enters Standby mode after total system inactiv-
ity.
T
Auto Suspend Timeout
You can select the system suspend timeout period. If no system activity has oc-
curred for the specified timeout, the system will enter the selected Suspend Op-
tion.
T
Suspend Option
Suspend mode is the default power management mode. When you select Sus-
pend, after a specified amount of inactivity, your NEC Versa shuts down all de-
vices as specified by the user in Setup (or applies default timeouts). All your data
is automatically recovered from where you left off when you Resume.
T
Auto Save to File (STF)
The system enters STF after 30 minutes in Suspend mode.
T
Panel Backlight
Lets you choose the backlight intensity.
T
Suspend Warning Tone
This parameter lets you enable or disable a warning tone when Suspend mode
starts. It is best to keep this option On.
T
Modem Ring Resume
Lets you choose whether the system resumes automatically when the external se-
rial port modem receives a transmission.
T
Wake Up Alarm/Resume Alarm Time
Lets you set a resume time from Suspend mode.

Peripherals Setup

The Peripherals Setup menu displays the connection location between the system and the
Input/Output (I/O) ports.
T
Serial Port
Disables or reassigns the serial port.
T
Parallel Port/Parallel Mode
Disables or reassigns the parallel port, and/or select a parallel port mode.
T
IR Serial Mode
Allows you to select the IR transfer rate.
T
Sound/Sound IRQ/SB-compatible DMA/Full duplex Mode DMA/Docking Sta-
tion Midi (MPU-401)
Adjusts the sound parameter to user defined, disabled or Auto. Change additional
sound related items as needed.