EMERGENCY CALL
If the vehicle is equipped, the emer
gency call function can be used to call
the emergency services (without
charge) automatically or manually in
the event of an accident or illness, re
ducing the time it takes for the emer
3
gency services to arrive.
Note: the emergency call function is
operational:
– in countries covered by the telemat
ics services and infrastructure associ
ated and compatible with the system;
– depending on the network coverage
in the geographical region where the
vehicle is being driven.
If you use the emergency call function
to report an accident which you have
witnessed, this implies stopping where
traffic conditions allow in order for the
emergency services to locate your ve
hicle and therefore the location of the
reported accident.
In all cases, comply with local legisla
tion.
Use the emergency call on
ly in the event of an emer
gency you are involved in, if
you witness an accident or if you
feel ill.
2 7 6 - D r i v i n g
1. System operation warning light:
– green: operational (network avail
able);
– off: nonoperational (network un
available, etc.);
– red: operation fault;
– flashing green: call in progress.
2. "SOS" button.
3. Microphone.
4. Speaker.
A call always takes place as follows:
– the call is initiated with the emer
gency services;
– data related to the incident
(manufacturer's plate, time of the call,
last locations, vehicle direction, etc.) is
sent;
– voice communication takes place
with the emergency services;
– if necessary, emergency assistance
is called.
There are two emergency call modes:
– automatic mode;
– Manual mode.
Automatic mode
The emergency call starts automatical
ly in the event of an accident that has
required the activation of the protective
equipment (seat belt pretensioners,
airbag etc.).
Need help?
Do you have a question about the MASTER 2024 and is the answer not in the manual?