TRIP COMPUTER
Vehicles not fitted with a multime
dia screen, display B
Press the switch 2 as many times as
required to reach the "Settings" world.
Repeatedly press control 3 or 4 to
reach the "Time setting" menu then
press switch 5 "OK".
Press and hold switch 5 "OK" until the
time flashes.
Set the hour using control 3 or 4 ,
press switch 5 "OK" to confirm, then
set the minutes using control 3 or 4
and press switch 5 "OK" to confirm.
Depending on the vehicle,
If the electrical supply is cut
(battery disconnected, bro
ken supply wire, etc.), the clock
will automatically go back to the
right time after a few minutes
once the system is capable of re
ceiving information GPS.
Exterior temperature indicator
Special feature:
When the exterior temperature is be
tween ˗ 3 °C and + 3 °C, the °C char
acters flash (signalling a risk of ice on
the road).
If the power supply is cut
(battery disconnected, sup
ply wire cut, etc.), the clock
must be reset.
We recommend that you do not
adjust these settings while dri
ving.
Exterior temperature
indicator
As ice formation is relat
ed to climatic exposure,
local air humidity and tempera
ture, the external temperature
alone is not sufficient to detect
ice.
G e t t i n g t o k n o w y o u r v e h i c l e - 1 4 7
2
Need help?
Do you have a question about the MASTER 2024 and is the answer not in the manual?