Renault MASTER 2024 User Manual page 230

ADDITIONAL DRIVING AID FUNCTIONS
– "Vibration": adjust the steering wheel
vibration for the "Lane departure pre­
vention" function;
– depending on the vehicle, "Lane exit
anticipation" or "Warning": adjust the
line detection sensitivity level. To do
3
this, select:
– "Late": line detected when
crossed;
– "Standard": line detected when
approached;
– "Early": line detected when near.
Adjusting settings from the trip
computer 4
– With the vehicle stationary, press
the switch 5 as many times as re­
2 2 8 - D r i v i n g
quired to reach the tab or, de­
pending on the vehicle, the
or
– depending on the vehicle, press
switch 5 and repeatedly press control
6 or 7 to reach the menu. Press
switch 8 OK;
– repeatedly press control 6 or 7 to
reach the " " menu or, depending
on the vehicle, the " " menu.
Press switch 8 OK;
– repeatedly press control 6 or 7 to
reach the "DRIVING ASSIST" menu.
Press switch 8 OK.
To adjust the sensitivity:
– repeatedly press control 6 or 7 to
reach the "Lane keep assist sensitivity"
menu. Press switch 8 OK;
– press control 6 or 7 repeatedly to
adjust the setting. Press switch 8 OK.
To adjust the vibration intensity:
– repeatedly press control 6 or 7 to
reach the "Lane keep assist vibration"
menu. Press switch 8 OK;
– press control 6 or 7 repeatedly to
adjust the setting. Press switch 8 OK.
Function temporarily unavailable/
disabled
The system is no longer available or
tab;
disabled when:
– very fast lane departure;
– driving continuously on a line;
– approximately four seconds after
changing lanes;
– tight bends;
– impaired visibility;
– one of the direction indicators is acti­
vated;
– activating the hazard warning lights;
– engaging reverse gear;
– strong acceleration;
– the lane width changes;
– operation of the Electronic Stability
Control system;
– operation of the anti-lock braking
system;
– the active emergency braking sys­
tem is triggered;
When the function is unavailable, the
warning light or, depending on
the vehicle, the left-hand and right-
hand lines 7 and the
light turn grey on the instrument panel.
When the front camera is obscured,
the "Front camera no visibility" mes­
sage appears on the instrument panel.
Clean the area where the sensors are
located.
warning