WIPER
With the ignition on, pull the stalk 1
then release.
A longer pull will trigger, in addition to
the windscreen washer, two sweeps of
the wipers followed, a few seconds lat
er, by a third.
Note:
– on electric versions, using the stalk
1 to activate the front washer function
for more than 30 seconds may hinder
the screen washer pump. This pre
vents the pump from overheating;
– in temperatures below zero, the
washer liquid risks freezing to the
windscreen, thereby reducing visibility.
Heat the windscreen using the demis
ter control before cleaning.
When working in the en
gine compartment, en
sure that the windscreen
wiper stalk is in position
B (stop).
Risk of injury.
Efficiency of a wiper
blade
Check the condition of the
wiper blades. How long they last
depends on you:
– it must remain clean: clean the
blade and the screen regularly
with soapy water;
– do not use it when the screen is
dry;
– free it from the screen when it
has not been used for a long time.
In all cases, replace it as soon as
it begins to lose efficiency: ap
proximately once a year 357.
Precaution for using the wipers
– In freezing or snowy conditions,
clear the screen before starting
the wipers (risk of motor over
heating);
– ensure that no objects are ob
structing the travel of the blade.
G e t t i n g t o k n o w y o u r v e h i c l e - 1 6 9
2
Need help?
Do you have a question about the MASTER 2024 and is the answer not in the manual?