VEHICLE E-TECH 100% ELECTRIC (EV)
Recharging the traction battery
Vehicle stationary, ignition off:
– take the charging cable 2 located in
the storage compartment in your
vehicle's luggage compartment;
– press the charging flap 8 to unlock
it. The warning light 9 illuminates in
white;
– plug in the end of the lead to the
power supply;
– grab the handle 10 ;
– plug in the vehicle cord. The warning
light 9 flashes in white;
Do not use the charging
flap 8 to hang the charging
lead 2 while recharging the
vehicle.
If you have just accepted a
system update via the mul
timedia system, the traction
battery charging will be delayed
or cancelled.
Wait for the update to be complet
ed before connecting the charging
lead to the vehicle. For more in
formation on system updates,
please refer to the multimedia in
structions.
– after you hear a locking click, check
that the charging cord is properly
plugged in. To check the locking, pull
gently on the handle 10 ;
– depending on the vehicle, if you
have programmed deferred charging
and you wish to start charging immedi
ately, press the button 7 to start charg
ing.
The charging cord is automatically
locked with the vehicle. This will make
it impossible to unplug the cord from
your vehicle.
G e t t i n g t o k n o w y o u r v e h i c l e - 3 9
2
Need help?
Do you have a question about the MASTER 2024 and is the answer not in the manual?