Renault MASTER 2024 User Manual page 352

BREAKDOWN RECOVERY
battery supplying the current should
have a capacity (amp-hours, Ah) which
is at least the same as that of the dis­
charged battery.
Ensure that there is no risk of contact
between the two vehicles (risk of short
circuiting when the positive terminals
are connected). Switch off your vehicle
ignition.
6
Attach the positive cable (+) A to the
terminal 3 after opening the cover 5 ,
then to terminal (+) 2 of the battery
supplying the current.
Attach the negative cable (˗) B to ter­
minal (˗) 1 of the battery supplying the
current, then to earth (˗) 4 .
3 5 0 - P r a c t i c a l a d v i c e
Start the engine of the vehicle supply­
ing the current and run it at an interme­
diate engine speed.
If your vehicle's engine does not start
immediately, switch off the ignition and
wait a few seconds before repeating
the operation.
With the engine running, disconnect
cables A and B in the reverse order
(4 ­ 1 ­ 2 ­ 3).
Ensure that there is no
contact between cables
A and B and that posi­
tive cable A is not in
contact with any metallic compo­
nent in the vehicle supplying the
current.
Risk of injury and/or damage to
the vehicle.