WIPER
Specific front wiper position
(service position)
2
This position enables the blades to be
lifted to remove them from the wind
screen.
It may be useful to:
– clean the blades;
– release the blades from the wind
screen in winter;
– replace the blades 357.
With the engine stopped or started, lift
the stalk 1 twice to position A (single
sweep).
The blades stop slightly away from the
bonnet.
To return the blades to the lowered po
sition, with the ignition on, ensure that
1 6 8 - G e t t i n g t o k n o w y o u r v e h i c l e
the wipers have folded down onto the
windscreen, then move the stalk 1 to
position A (single sweep).
Before switching on the ignition, place
the wipers on the windscreen. Other
wise, there may a risk of damage to
the bonnet or the wipers when they are
switched on.
Before any action involv
ing the windscreen
(washing the vehicle, de-
icing or cleaning the
windscreen, etc.) return the stalk
1 to position B (park).
Risk of injury and/or damage.
In the event of obstacles on
the windscreen (dirt, snow,
ice etc.), clean the wind
screen (including the central area
located behind the interior rear
view mirror) before starting the
wipers (risk of motor overheating).
If an object is preventing a blade
from moving, it may stop function
ing.
Remove the obstacle and reacti
vate the wiper using the wiper
stalk.
Windscreen washer
Need help?
Do you have a question about the MASTER 2024 and is the answer not in the manual?