Renault MASTER 2024 User Manual page 130

TRIP COMPUTER
General information
Depending on the vehicle, this in­
2
cludes the following functions:
– mileage;
– trip settings;
– information messages;
– operating fault messages (related to
the warning light);
– warning messages (related to the
warning light).
Vehicle fitted with trip computer A
Scroll through the following information
by repeatedly pressing button 2 or 3
1 2 8 - G e t t i n g t o k n o w y o u r v e h i c l e
(the display depends on the vehicle
equipment and country):
a) total mileage and trip mileage
recorder;
b) journey settings:
– average fuel consumption;
– current fuel consumption;
– Estimated range with remaining fuel;
– distance travelled;
– average speed;
c) current speed;
d) service and oil change interval;
e) Reset the tyre pressure
f) trip log, operating faults and informa­
tion message readout;
g) engine coolant temperature;
h) clock and exterior temperature;
i) general adjustment.
Trip mileage resetting
With the "Trip mileage recorder" se­
lected on the display, press button 2 or
3 until the mileage recorder resets to
zero.
Resetting the journey parameters
(reset button)
With one of the journey parameters se­
lected on the display, press button 2 or
3 until the display resets to zero. With
one of the journey parameters select­
ed on the display, press button 2 or 3
until the display resets to zero.
Resetting the trip mileage recorder
and journey parameters (reset but­
ton)
(depending on the vehicle)
With one of the trip settings selected
as the display, press and hold switch 4
"OK" until the display resets to zero.
Interpreting some of the values
displayed after resetting
The values showing average fuel con­
sumption and average speed will be­
come more stable and reliable the fur­
ther you have travelled since the last
time the Reset button was pressed.
The average fuel consumption may
decrease when:
– the vehicle stops accelerating;
– the engine reaches its operating
temperature (if the engine was cold
when the reset key was pressed);
– when driving from an urban area on­
to the open road.
Automatic resetting of the journey
parameters
Resetting occurs automatically when
the maximum value of any of the para­
meters is exceeded.