KEY, REMOTE CONTROL
Use
Radio frequency remote control A
The remote controls A lock and unlock
the front doors, the sliding side doors
and the rear hinged doors.
They are powered by a battery which
can be replaced 49.
The key must not be used
for any function other than
those described in the
handbook (removing the cap from
a bottle, etc.).
Locking the doors
Press button 4 .
The hazard warning lights and side in
dicator lights flash twice to indicate
locking.
Depending on the vehicle, press and
hold button 4 to lock the vehicle and
close the front windows.
Note: pressing button 4 once locks
the front or rear zone if all of the open
ing elements in the zone are locked.
If the hazard warning lights
and side indicator lights do
not flash when the vehicle
is locked, check that all the open
ing elements are locked.
Unlocking the doors
Pressing button 3 unlocks the front
doors in Secure mode and unlocks all
the opening elements in Access
mode.
There are two ways to use the remote
control: access mode and secure
mode.
To switch between the remote control
user modes, use the "Access" menu
from the trip computer or, depending
on the vehicle, from the multimedia
screen 144.
Note: in the event of disconnection/re
placement of the 12 Volt battery, the
"Access" mode will be reconfigured by
default.
Briefly press button 5 to unlock the
rear hinged doors and the sliding side
door.
The hazard warning lights and side in
dicator lights flash once to indicate
unlocking.
With the engine running
and the ignition on 184,
the remote control buttons
are inactive.
To lock/unlock the doors
from the inside 57.
G e t t i n g t o k n o w y o u r v e h i c l e - 4 7
2
Need help?
Do you have a question about the MASTER 2024 and is the answer not in the manual?