ACCESSING THE ENGINE, LEVELS
If the level needs to be topped up, only
use products approved by our Techni
cal Department which ensure:
– antifreeze protection;
– anticorrosion protection of the cool
ing system.
Replacement intervals
Refer to the maintenance document
for your vehicle.
5
Do not do any work un
der the bonnet when the
vehicle is charging or
when the ignition is
switched on.
When working in the en
gine compartment, en
sure that the windscreen
wiper stalk is in the park
position.
Risk of injury.
3 1 8 - M a i n t e n a n c e
Levels, filters
Brake fluid level
This should be checked frequently, and
immediately if you notice even the
slightest loss in braking efficiency.
The level should be read with the en
gine switched off and on level ground.
Level 1
It is normal for the level to drop as the
brake shoes become worn, but it must
never drop lower than the "MINI" warn
ing line 2 .
If you wish to check the disc and drum
wear yourself, you should obtain the
document explaining the checking pro
cedure from our network or from the
manufacturer's website.
Topping up
After any operation on the hydraulic
circuit, a specialist must replace the
fluid.
Only use fluids approved by our Tech
nical Department (and taken from a
sealed container).
Need help?
Do you have a question about the MASTER 2024 and is the answer not in the manual?