TRANSPORTING OBJECTS
Transporting objects in the rear
load area
Depending on the vehicle, securing
rings 1 and 2 can be used to stop
transported objects from moving. The
number of rings and their position may
vary depending on the vehicle.
The sole purpose of these
rings 2 is to prevent trans
ported objects from moving.
The objects must be secured to
the mounting rings 1 on the vehi
cle floor beforehand.
Always position the
heaviest items directly
on the floor. Use the
lashing points on the lug
gage compartment floor, if these
are fitted to the vehicle. The lug
gage should be loaded in such a
way that no items will be thrown
forward and strike the occupants
if the driver has to brake sudden
ly. Fasten the rear seat belts,
even if the seats are not occu
pied.
F max: 500 daN (as indicated on label
A located in the rear load area).
Yo u r c o m f o r t - 3 0 7
4
Need help?
Do you have a question about the MASTER 2024 and is the answer not in the manual?