AIR VENTS, HEATING AND AIR CONDITIONING
Air recirculation (isolation of the
passenger compartment)
This function is managed automatically
but you can also activate it manually.
In this case, the operation is confirmed
by the illumination of an indicator light
on the button 7 .
Using the demisting/deic
ing function will disable the
air recirculation.
Manual use
Press button 7 and the built-in warning
light comes on.
Prolonged use of this position may
lead to odours, caused by non-renewal
of air, and the formation of condensa
tion on the windows.
To avoid this, air recirculation is dis
abled automatically after a certain
time.
Stopping the system
Turn the control 1 to "OFF" to stop the
system. To start it, turn the control 1
again to adjust the blower speed or
press button 4 .
Fuel consumption increas
es when the air condition
ing is being used (switch it
off when it is not required).
Electric windscreen de-icer
With the engine on, press switch 9
(the built-in warning light comes on).
This function deices/demists the wind
screen (on equipped vehicles).
To exit the function, press switch 9
again.
Air conditioning: information
and advice on use
Advice on use
In some situations (air conditioning off,
air recirculation activated, ventilation
speed at zero or low etc.), you may no
tice that condensation starts to form on
the windows and windscreen.
If there is condensation, use the
"Clear View" function to remove it,
then use the air conditioning in auto
matic mode to stop it forming again.
Vehicles equipped with
Eco mode
Once activated, Eco mode
may reduce the performance of
the automatic air conditioning
288.
Do not add anything to
the vehicle's ventilation
circuit (for example, to
remove bad odours).
There is a risk of damage or of
fire.
Yo u r c o m f o r t - 2 9 1
4
Need help?
Do you have a question about the MASTER 2024 and is the answer not in the manual?