Renault MASTER 2024 User Manual page 345

TYRES
Place the jack 2 horizontally. The jack
head 5 must be positioned at the
same level as the support point 3 .
Rear jack support point 6
Position the jack 2 horizontally. The
head of the jack must line up with the
point 6 provided.
Place the jack 2 horizontally. The jack
head 5 must be positioned at the
same level as the support points 6 .
Start cranking the jack up by hand to
align the base plate (which should be
pushed slightly under the vehicle).
Turn the handle 4 a few times until the
wheel comes off the ground, then re­
move the bolts and the wheel itself.
Fit the emergency spare wheel on the
central hub and turn it to locate the
mounting holes in the wheel and the
hub.
If bolts are supplied with the emer­
gency spare wheel, only use these
bolts for the emergency spare wheel.
Tighten the bolts, checking that the
wheel is correctly positioned on its hub
and unscrew the jack.
Note: do not lubricate the wheel bolts
Anti-theft bolt
If you use anti-theft bolts, fit
these nearest the valve
(wheel embellisher may not be
able to fit).
P r a c t i c a l a d v i c e - 3 4 3
6