Renault MASTER 2024 User Manual page 340

TYRES
Do not leave the tools
unsecured inside the ve­
hicle as they may be
projected during braking.
After use, check that all the tools
are correctly clipped into the tool
kit, then position it correctly in its
housing to reduce any risk of in­
jury.
If bolts are supplied with the
emergency spare wheel, you
must use these bolts only for the
6
emergency spare wheel.
Hydraulic jack
If the vehicle is parked
on the hard shoulder,
you must warn other
road users of your
vehicle's presence with a warning
triangle or with other devices as
per the legislation applying to the
country you are in.
3 3 8 - P r a c t i c a l a d v i c e
Switch on the hazard
warning lights.
Keep the vehicle away
from traffic and on a lev­
el surface where it will not slip.
Apply the parking brake and en­
gage a gear (first or reverse, or in
position D, M or R for automatic
transmissions).
Ask the passengers to leave the
vehicle and to keep away from
traffic.
For your safety, the use
of a jack not recom­
mended by the manufac­
turer is strictly prohibited.
The jack is specific to the vehicle
and used to change the wheels.
Under no circumstances should it
be used:
– on another vehicle;
– to carry out a repair;
– to access the underside of the
vehicle.
Risk of injury.
Risk of damage to the vehicle.
Using the hydraulic jack
To prevent any risk of in­
jury or damage to the ve­
hicle, only crank the jack
until the wheel you are
replacing is a maximum of 3 cen­
timetres off the ground.
Remove the jack 1 located in the tool
kit. Familiarise yourself with the jack
arrangement prior to using it.
Front jack support point 2